Esoteric D00864200A manual DVI-D video output terminal, D1/D2 video output terminals component

<Adjust the video aspect ratio to match that of the television (see page 38) .

<If the component video terminals or the D1/D2 terminal are used to connect the unit to a television with progressive scan capabilities, the output can be set to match this (see page 39).

<This unit adopts analog copy protection features. If the unit is connected to a TV through a VCR (video cassette recorder), the resulting playback may be affected. Connect the unit directly to the television.

<In all cases, use the highest quality cables for the best possible picture.

ADVI-D video output terminal

Use a commercially available DVI-D output cable to connect the unit to a DVI/HDCP compatible television or monitor.

DVI output formats

480p (NTSC) or 576p (PAL), 720p, 1080i

<The television connected in this way must be DVI/HDCP compatible. Use with incompatible televisions may sometimes result in the playback picture not being visible.

<See page 26 for further details on DVI output formats.

<Make sure that you read and understand the documentation provided with the DVI component, as well as this unit’s documentation.

BD1/D2 video output terminals (component)

By using a commercially available D terminal cable to connect the unit to a “D compatible” (D1, D2, D3 or D4) television or monitor, high-quality images, equivalent to those achieved using component video, will be displayed.

<D terminal cable is not available in all countries.

D terminal and signal format (NTSC/PAL)

480i/576i480p/576p

(525i/625i) (525p/625p)

D1 terminal X

D2 terminal

D3 terminal

D4 terminal

Numbers in parentheses show the number of scan lines i = interlace (flyback)

p = progressive scan

CComponent video output terminals

Use commercially available BNC coaxial cables to connect the unit to the component video inputs of a suitably equipped television or monitor to enjoy a high-quality picture. Use these terminals in preference to S-Video or composite video connections.

<Note that these terminals cannot be connected to high definition component (Y/PB/PR) terminals.

<If the television or monitor is equipped only with RCA (pin) jacks for component video, a suitable adaptor cable or adaptors should be used.

DS-Video output terminal

Use a commercially available S-Video cable to connect the unit to the S-Video input of a suitably equipped television or monitor. Use this connection in preference to a composite video connection.

EComposite video output terminal

Use a commercially available RCA (pin) video cable to connect the unit to the composite video connector of a television or monitor. Use this connection only if no other video connection method is available.

11