Solving common ice maker/dispenser problems
PROBLEM
Ice crescents attached at corners
Ice maker will not operate or Ice Is not made fast enough
Off-taste or odor In ke
Ice dispenser will not work
Ice dispenser stops working
14
POSSIBLE CAUSE/SOLUTION
l This is normal. They break apart easily. Shake bin occasionally to keep cubes separated.
l ON/OFF lever is in the OFF (up) position. Lower level to the ON (down) position.
l Freezer is not cold enough. Adjust temperature controls and wait 24 hours.
(See “Changing the control settings” on page 7.)
l New plumbing connections can cause discolored or off - flavored ice. Discard the first few batches of ice.
l Cubes are stored too long. Throw them away and make a new supply.
l Food is not wrapped properly. See page 26.
l Freezer and ice bin need to be cleaned. See page 22.
l Water may contain minerals (such as sulfur). A filter may be required to remove them.
l Freezer door is open.
l Ice bin not properly installed. Make sure the bin is pushed in all the way.
l Wrong ice in bin. Only use crescents from the ice maker. Shake the bin occasionally to separate cubes and increase storage room.
l Dispenser not used for extended periods of time, causing ice cubes to melt together. Dump old ice and make a new
supply.
l Ice dispenser bar held in too long. Wait about 3 minutes for dispenser motor to reset.
l Large amounts of ice should be taken from the bin, not through the dispenser.
WITH PUEIIIONS 011 COYYENTI