Estate 2173445 warranty Connecting to refrigerator

Connecting to refrigerator

1.(On kii models, assemble water valve to refrigerator per kit instructions.) Route the copper tubing through the tube clamp provided as shown at left. Connect the % inch copper tube from the shut-off valve to the water valve at the lower, left rear of cabinet. Use a compression nut and sleeve as shown at left. Tighten the compression nut. Do not overtighten.

2.Turn shut-off valve ON. CHECK FOR LEAKS. TIGHTEN ANY CONNECTIONS (INCLUDING CONNECTIONS AT THE VALVE) OR NUTS THAT LEAK.

3.The ice maker is equipped with a built-in water strainer. If local water conditions require periodic cleaning or a well is your source of water suppty, a second water strainer should be installed in the %-inch water line. Obtain a water strainer from your nearest appliance dealer. Install at either tube connection.

4.Reconnect electriil supply to refrigerator.

Uee only Wnch

copper tublng from cold water line

Tube clamp

- %-Inch compree- don nut end

l l88ve

18