SOLARLINKFR600 OWNER’S MANUAL
Your radio can be set for one (SINGL) to 23 (MULTI) codes, or can be set to receive ALL coded information sent from any transmitter, if your within range. When you set codes, it will only pick up alerts when you’re in that county or within reception distance of the signal. To set codes:
1)Revolve the <Band Selecting Knob> to the “OFF” position.
2)Press the <MENU> button shortly to enter the setting menu.
3)Press or shortly to select the “COUNTY CODE” option.
4)Press <SELECT> shortly once to enter the county code setting mode (MULTI, SINGL or ALL), which blinks in the display.
5)If you don’t know your county code, select ALL with or and press <SELECT> and then <MENU> TO EXIT. If you know your code, don’t press SELECT and go to the next section.
6)Press or shortly to select MULTI or SINGL and press
<SELECT>.
7)Press <SELECT> shortly again to enter the code. CODE 01 XXXXXX appears in the display, with 01 flashing.
8)Press <SELECT> again and the first digit of six starts flashing. Press or to set the first digit and then press to go to the second digit, doing this again and again until all six digits are entered.
9)If you’re in SINGL, press <SELECT> and then <MENU> to exit. If in MULTI, go to the next step.
10)If you’re in MULTI and wish to enter more codes, press
<SELECT>.
11)01 flashes. Press or to go to another code setting number
17
