HOW to Connect the Machine to the Power Supply

1.Bobbin winder thread guide 2.Thread tension dial 3.Pattern selector dial 4.Bobbin winder spindle 5.Bobbin winder stopper 6.Balance wheel

7.Stitch display 8.Reverse button 9.Needle clamp and screw

10.Shuttle cover 11.Presser foot 12.Presser foot thumb screw 13.Needle

14.Screw for face plate 15.Face plate 16.Extension table 17.Presser foot lifter

(Accessories storage compartment)

HOW TO CONNECT THE MACHINE TO THE POWER SUPPLY

1.Fit the machine plug into the machine. 2.Plug the power cord to the power supply.

Note:*Before plugging in the machine, ensure the voltage and

number of cycles indicated, conforms to your electricalSwitch power supply.

Sewing speed can be varied by the foot control. The harder you press on the controller, the faster the machine runs.

Note:*By releasing the controller, the machine stops running auto- matically.

*Before using the machine, practice controlling the speed without threading.

The sewing lamp is located behind the face plate.

Remove the face plate by loosing the screw of the face plate. Bulb type: To remove...Unscrew

To replace...Screw

Note:*Before replacing a bulb, disconnect the machine from the power supply.

*Bulbs are available from sewing machine retailers.(Use a 15-Watt bulb)

Caution!

Before leaving the machine, changing parts or doing any other

work on it, always disconnect the plug from the wall socket.