Assembly and Use for the 64 oz. Bowl
WARNING: Never leave the appliance unattended while in use.
ASSEMBLY
Fig. 1 | Fig. 3a | Fig. 4 |
|
|
Fig. 2 | Fig. 3b | Fig. 5 |
IMPORTANT: Make sure that the motor base is plugged in for use.
1Place the motor base on a clean, dry, level surface such as a counter or table top.
2Align and lower the Bowl onto the motor base. (Fig. 1) Handle should be aligned slightly to the right of the “LOCK” symbol on the motor base.
3Rotate the bowl clockwise as far as it will go to lock in place. (Fig. 2)
4The bowl can be placed on the motor base two ways; the handle can be on the front right corner or the front left corner.
(Fig. 3a, Fig. 3b)
5Holding the desired blade by the top of the shaft, place it onto the drive gear inside the bowl. Ensure that the attachment is seated properly and is standing upright. (Fig. 4)
NOTE: The blade will fit loosely on the drive gear.
6Add the ingredients to the bowl, making sure that they do not exceed the highest measured marking line on the side of the bowl.
7Plug the power cord into the electrical outlet and press the power button ().
NOTE: As a safety feature, the power button () will flash and the motor will not work if the bowl and lid are not installed correctly. When the bowl and lid are installed properly, the power button () will be solid, indicating that the appliance is ready for use.
8Holding the lid by the handle in the upright position, place it on top of the bowl aligning the arrow () located on the lid with the arrow () located on the bowl’s handle. (Fig. 5) Press the handle down until you hear a click.
NOTE: The 64 oz. bowl is not intended for blending drinks. Do not overfill.
11
TOLL FREE:
BL770_series_30_IB_ENG_120627_3.indd 11