MODEL EDW254E OPERATING INSTRUCTIONS
CONTROL PANEL
LCD Window | Indicator Lights | Program Knob |
|
Delay Start | Start | Top Load | On/Off |
|
|
|
ON/OFF BUTTON
Press this button to turn the power to the machine on and off. The LCD will light up when the power is on. You must turn the power on before you select a program or option.
PROGRAM KNOB
Turn the program knob left or right until the pointer aligns with the program you wish to select.
Before you can select a program, you must turn the program knob back to the “stop” position to reset the unit.
INDICATOR LIGHTS
The lights on the right indicate which cycle is currently in progress.
The Rinse Aid light glows when you need to add rinse aid. (See page 17 for instructions on how to load the rinse aid dispenser.)
The Energy Saver light indicates that you have selected a program that uses the low wash temperature.
After you have selected the wash program and option(s) you prefer, press this button to start a program. Asignal will sound to indicate the program has begun and the LCD will display the program run time.
TOP LOAD
This option is good for small loads that only fill the top or bottom basket. (This option is not available with the Soak and Hold and Rinse programs.)
This button allows you to wash only the top or bottom basket. Press this button once to wash the top basket only. The LCD will display three bars across the top to indicate the top basket wash has been selected.
To wash the bottom basket only, press this button twice. The LCD will display three bars across the bottom to indicate the bottom basket wash has been selected.
The Top Load button will glow when you select a top or bottom basket wash.
LCD WINDOW
The LCD displays programs, delay hours, and run time. It also displays error codes (see page 31).
OPTION BUTTONS
Please note that you must select the options after you’ve selected the wash program and before you press the Start button. The buttons for the options selected will glow.
DELAY START
You can delay starting the program from 1 to 16 hours. Press this button until the number of hours you wish to delay starting the program displays on the LCD. The Delay Start button will glow when you select a delayed start.
START
CANCELLING A PROGRAM
To cancel a program after it has started, turn the program knob to the Stop position until “- -
Please note that if the program has run beyond the fill phase, the water will be pumped out and a buzzer will sound. When the selected program setting displays you can change the program.
END-OF-PROGRAM BUZZER
At the end of the program, a prolonged buzzer will sound. This indicates the program is complete.
22
