Page 10
Before You Ride Checklist
Before riding the Stand N Ride electric scooter, be sure to carefully follow the checklist below:
-Read and understand the Important Safety information section of your Owner’s Manual.
-Make sure that the battery pack has been fully charged.
-Check that the battery pack connection to the base frame is tight.
-Check that the tiller and the base unit components are securely connected and that the secondary safety knob is in place and securely fastened.
-Make sure that the handle bars height (and the seat height if you are using this option) are adjusted to your preference .
-Carefully check all joints, quick release levers, locking buttons and latches to ensure each is secured.
-Check that your tires are properly inflated if not fitted with the
-Check the brake lever for proper function.
-Most importantly, make sure to have your helmet ready to be worn.
How to ride the Stand N Ride Scooter
It is important that you understand how to operate the scooter, so carefully follow these steps:
1.Mount the unit and position yourself behind the handle bars with your feet resting on the floorboard.
2.Check that the brake is not locked. Squeeze it to disengage it if it were locked.
3.Turn the key to ON position (clockwise).
4.Check to see if the battery gauge is in the green zone.
5.Make sure that the speed direction switch (FWD/REV) is set to go forward or reverse depending on the direction that you want to go to.
6.Select the speed setting (Fast or Half Speed) as desired. We recommend that you begin using the Stand N Ride scooter only in half speed until you get acquainted with
