MENU

6.16 PTZ SETTING MENU

PTZ SETTING MENU

PTZ ENABLE: OFF

PTZ Port: RS485

PROTOCOL: PELCO- D

BAUD RATE: 9600

PTZ ADDRESS:

 

CH1: 001

CH9: 009

CH2: 002

CH10: 010

CH3: 003

CH11: 011

CH4: 004

CH12: 012

CH5: 005

CH13: 013

CH6: 006

CH14: 014

CH7: 007

CH15: 015

CH8: 008

CH16: 016

The EDSR600/900/1600 Recorder from FW 1.09 provides telemetry control over network. Local device telemetry control at the EDSR recorder is not possible. Telemetry bus may be connected to RS-232 or RS-485.

In the PTZ SETTING MENU, we define

PTZ ENABLE: ON activates telemetry function / OFF disable telemetry function.

PTZ - Port: Selection of active telemetry port, RS232 or RS485.

ATTENTION: If the EDSR is remote controlled by RS-485 keyboard, and telemetry must be connected to the RS232 - port (with interface converter)

PROTOCOL: Supported protocols: PELCO- D, PELCO-P, EVERFOCUS* und VPROTECT* (* reserved for future us, currently not supported)

BAUD RATE: There are 6 telemetry transmission rates, selectable 1200, 2400, 4800, 9600, 19200, 38400 baud rate.

PTZ-ADRESS:Telemetry receiver / Dome camera address assignment to the video inputs

Turn the JOG dial clockwise or counter-clockwise to select the options.

Press ENTER key to confirm the option and move to next column.

ENTER

Press MENU key to return to Main Menu, press again to leave Set up Menu.

MENU

29

Page 34
Image 34
EverFocus EDSR-900, EDSR-1600 instruction manual PTZ Setting Menu