EverFocus EDSR-900, EDSR-1600 instruction manual Back Panel Connections, On/Off, AC100~240V

Back Panel Connections

2. Back Panel Connections

6 5 4 3 2 1

EDSR-900

7	8	9	10	11	12	13		14
6						3	5	4	2	1
	EDSR-1600

7 8 9 10 11 12 13 14

1	ON/OFF:	Main on/off switch.
2	AC100~240V	power socket.

3Matrix Outputs: These connectors are used for additional 4 programmable Call monitors. With these outputs, there are totally 4 Matrix out monitors.

These monitors can only display full screen as regular call monitor.

4

5

6

7

8

9

VIDEO IN: BNC-sockets for composite signal video inputs, automatic 75 Ohm termination (EDSR-900: 1 ~ 9, EDSR-1600: 1 ~ 16).

VIDEO OUT: Loop through video outputs for each input channel. (EDSR-900: 1 ~ 9, EDSR-1600: 1 ~ 16)

CALL MONITOR: BNC-socket Call (Spot) Monitor, composite signal. (Full screen display only)

MAIN MONITOR: BNC-socket main monitor, composite signal. Main monitor provides Full screen, Multi-screen, Setup.

S-VIDEO:Mini-DIN socket main monitor, S-Video signal. Main monitor provides Full screen, Multi-screen, Setup.

AUDIO IN : 2 x Cinch socket audio input 500 mV max., 10K Ohm impedance.

AUDIO OUT: 2 x Cinch socket audio output 500 mV max. at 10K Ohm

3