MENU

PTZ-CONTROL WITH WEB BROWSER (from FW 1.09 only)

If the checkbox "PTZ CONTROL" is activated in the Web’s applet of the EDSR600/900/1600, the screen shows the telemetry control functions.

Please consider the time delay in video network transmission at manual PTZ control! PTZ network control is not recommended for ISDN or analogue transmission lines due to slow video transmission rate and long video delay.

Control buttons:

1. PTZ CAMERA:

Camera selection

2.REACTION METHOD: Reaction method of PTZ keys

 

Continuous - commands send permanent if

 

button is pressed

 

Step x 10 -

10 command / key press

 

Step x 5 - 5 command / key press

 

Step x 1 - 1 command / key press

3. Arrow keys:

Control of pan / tilt

4. Z+ / Z-:

Zoom function Z+: tele, Z-: wide

5. Focus:

manual focus NEAR or FAR

6. IRIS:

manual iris control INC: open iris

 

 

DEC: close iris

7. PRESET:

Preset selection

 

SET: Storing of current PTZ position

 

CLR: Deleting of selected preset

 

GO: calls the selected preset position

8. SEQ.*:

Preset tour

 

 

1 ~ 60 sec.: Dwell period between presets in

 

 

tour

 

RUN:

Start preset tour

 

STOP:

Stop preset tour

9.AUTO PAN**: Automatic Pan – function

Low-Fast:AUTO PAN speed

RUN: AUTO PAN Start

STOP: AUTO PAN Stop

*function not supported for ED2250 with PELCO - P Protocol

**function not supported for ED2250

51

Page 56
Image 56
EverFocus EDSR-900, EDSR-1600 instruction manual PTZ Camera, Preset, Run