INSTALLATION
5.Installation
(1)Insert a HDD (IDE) for Video Storage
Insert a HDD(IDE) for Video Storage The HDD should be set as MASTER. (Normally the default setting of HDD is Master)
Note: After hard disk case is inserted into the hard disk tray, be sure to turn the tray key in lock position. Otherwise, HDD will not be detected.
(2)Connect cable for video/audio input and video/audio out, The POWER LED lights if power is normal.
(3)Switch Power On
The detail connection is described in SYSTEM CONNECTION.
(4)Press MENU key to enter SET UP MENU.
Once inside the main menu you will find there are
13 set up pages as below:
MENU
1.CLOCK/LANGUAGE SETTING MENU
2.TITLE SETTING MENU
3.DAYLIGHT SAVING SETTING MENU
4.TIMER SETTING MENU
5.NORMAL RECORD SETTING MENU
6.ALARM RECORD SETTING MENU
7.BUZZER SETTING MENU
8.ARCHIVE SETTING MENU
9.NETWORK SETTING MENU
10.SEQUENCE SETTING MENU
11.RS232/RS485 SETTING
12.MOTION RECORD SETTING MENU
13.SYSTEM SETTING MENU
(5) |
| Turn the Jog dial clockwise or counterclockwise to change set up page. |
|
|
|
10
