Specifications
Operator Controls
•Steering and Motion Control:
Note: Motion control levers are adjustable to two heights.
–Separate levers, on each side of the console, control speed and direction of travel of the respective drive wheels.
–Steering is controlled by varying the position of the levers relative to each other.
–Moving motion control levers outward (in slots) locks the drive system in neutral.
•PTO Engagement Switch: Engages electric clutch (to drive belt) which engages mower blades.
•Parking Brake Lever: Engages parking brake.
•Parking Brake Release Button: Releases parking brake.
•Deck Height Adjustment Lever: Sets cutting height to desired position.
•Deck Lift Pedal: Foot pedal that lifts deck.
•Transport Lock:
–Latching position: Automatically latches at the transport position.
–Unlatching position: Deck does not latch at the transport position.
Seat
•Type: Standard seat with high back, extra wide foam padded seat cushion with internal suspension, thick bolstering, armrests, integral safety switch.
Optional seat accessories for units with standard seats:
–Custom ride suspension system to enhance Standard Seat. Adds approximately 3 inches (7.6 cm) to seat height.
–Deluxe suspension seat with high back, low profile
–Seat Isolation System for reduced vibration, to enhance ride of standard seat, standard seat with Custom Ride Seat Suspension or Deluxe Suspension Seat. Adds approximately 1 inch (2.5 cm) to seat height.
•Mounting: Adjustable fore and aft on seat tracks.
•Armrests:
–Standard seat: foam padded adjustable
–Suspension seat: molded adjustable
•Seat Safety Switch:
Integrated seat switch. Time delay seat switch eliminates rough ground
Hydrostatic Ground Drive System
•Two unitized hydrostatic transmissions: 12cc Parker axial piston pump
240cc Parker geroler motor
•Hydraulic Oil Type: Exmark Premium Hydro oil.
•Hydraulic Oil Capacity: 52 oz (1.5 L) per side
•Hydraulic Filter: P/N
•Speeds:
–
–
•Drive wheel release valves allow machine to be moved when engine is not running.
Tires & Wheels
| Drive | Front Caster |
| Pneumatic | |
|
| |
Quantity | 2 | 2 |
Tread | Turf Master | Smooth |
|
|
|
Size (72 Deck) | 24 x | 13 x |
|
|
|
Size (60 Deck) | 24 x | 13 x |
|
|
|
Size (48 & 52 | 24 x | 13 x |
Decks) |
|
|
Ply Rating | 4 |
|
|
|
|
Pressure | 13 psi (90 kPa) |
|
|
|
|
Cutting Deck
•Cutting Width:
–48 inch Deck: (121.9 cm)
–52 inch Deck: (132.1 cm)
–60 inch Deck: (152.4 cm)
–72 inch Deck: (182.9 cm)
•Discharge: Side
16