Others
126
VQT1B25
Troubleshooting
If you return the menu settings to the initial
settings at the time of purchase, the
condition may improve.
Select [RESET] in the [SETUP] menu.
(P24)
∫Battery and power source
1:The camera cannot be operated even
when it is turned on.
•Is the battery inser ted correctly?
•Is the battery sufficiently charged?
–Use a batter y that has been
sufficiently charged.
2:The LCD monitor turns off while the
camera is turned on.
•Does the picture appear on the
Viewfinder?
–Press the [EVF/LCD] button to switch
to LCD monitor display.
•Is power save mode (P23) activated?
–Press the shutter button halfway to
cancel these modes.
•Is the battery exhausted?
–Use a batter y that has been
sufficiently charged.
3:The camera turns off immediately
after it is turned on.
•Is the battery charge insufficient to
operate the camera?
–Use a batter y that has been
sufficiently charged.
–Che ck the time set in power save
mode. (P23)
–If you leave the camera on, the
battery will be exhausted. Turn the
camera off frequently by using power
save mode (P23) etc.
∫Recording
1:The picture cannot be recorded.
•Is the mode dial correctly set?
•Is there any m emory remaining on the
built-in memory or the card?
–Before recording, delete some
pictures. (P36)
2:The recorded picture is whitish.
The lens is dirty.
•The picture can become whitish if there
is dirt e.g. fingerprints on the lens. If the
lens is dirty, turn the camera off, retract
the lens barrel (P10) and gently wipe
the lens surface with a soft dry cloth.
3:The recorded picture is too bright or
dark.
•Check that the exposure is c orrectly
compensated. (P48)
4:2 or 3 pictures are taken at one time.
•Is auto bracket (P49) or burst mode
set? (P51)
•Is the self-timer set to
[10S/3PICTURES]? (P47)
5:The subject is not focused properly.
•The focus range varies depending on
the recording mode.
Rotate the mode dial to set the proper
mode for the distance to the subject.
•Is the subject beyond the focus range of
the camera? (P28, 54)
•Have you taken a picture with jitter?
6:The recorded picture is blurred. The
optical image stabilizer is not
effective.
•The shutter speed will become slower
and the optical image stabilizer function
may not work properly when taking
pictures especially in dark places. In
this case, we recommend holding the
camera firmly with both hands when
taking pictures. (P27) We recommend
using a tripod and the self-timer (P47)
when taking pictures with a slow shutter
speed.
DMC-FZ8_PP ENG.book 126 ページ ２００６年１２月２６日　火曜日　午後４時２０分