Troubleshooting
If your UBC 2500XL T is not performing properly, try the steps listed below.
PROBLEM
Scanner won't work.
Improper reception.
Scan won't stop.
Scan won't start.
Search won't start.
Keypad won't work.
SOLUTION
. Check the power connections.
. Check the volume and squelch.
. Make sure the power switch is turned on.
. Check the antenna connection.
. You may be in a fringe area. Reposition the scanner.
. Adjust the Squelch Control.
. Check the antenna connection.
. It is possible that none of the programmed frequencies are
active at the time. Try the band search.
. Make sure there are some
programmed channels.
. Adjust the Squelch Control.
. Adjust the Squelch Control.
. Check the Keypad Lock.
If you still cannot get satisfactory results and want additional information, or to return the unit for service, please call or write the Uniden Technical Service Division. The address and
phone number are listed in the Warranty (at the end of this manual).
I
31
=I
