Select the bank(s) to be programmed. The indicators of the selected banks stop flashing.
Note: If the selected bank is full, that is, all 20
channels are programmed, "FULL:'appears on the
display. In this case, select another bank.
Press [SRC] to start programming.
On the display, only the indicators of the selected banks remain. The indicator of the bank currently being programmed starts blinking. The channel currently being stored is also displayed.
Note: During AUTO STORE, the search does not stop
on any active channel. You will not hear any audio, and no duplicate frequency will be stored.
TO STORE stops automatically when all available channels
.he selected banks are stored. "FuLL:' appears, and the last :mnel stored is displayed.
stop AUTO STORE manually, press [HLD], [MANUAL], [AUTO]. The last channel number and its frequency are
;played.
. Transferring a Programmed Frequency to
~nother Open Channel
his feature allows you to reassign a stored frequency to I nother bank's open channel.
Note: You cannot transfer a Priority Channel (preceded by a uP" on the display). You must assign the Priority to another channel in the same bank before transferring the frequency. (Priority Channels are described later in "Setting Up Priority Channels".)
1.Press [MANUAL] to stop scanning.
2.Use the Rotary Tuner (or any other previously described method) to select a programmed channel.
3.Press [SND] to activate the Transfer feature. All bank indicators start flashing on the display.
4.Press the numeric key(s) of the selected bank.
Only the indicator of the selected bank remains on the display. The bank's lowest open channel flashes,
waiting to be programmed.
5.Press [E] to complete the transfer.
The frequency is now stored in the new channel, and the old channel is empty.
21
