![](/images/new-backgrounds/1205101/20510131x1.webp)
To fully charge the battery, leave the Adaptor/Charger connected for 14 to 16 hours. Note: You can operate
the unit while the battery is charging.
3.When charging is complete, disconnect the Adaptor/ Charger from the AC outlet and from the Battery Pack.
Note: Disconnect the AC Adaptor/Charger from the unit during a power failure.
Mounting the Flexible Antenna
Place the end of the antenna onto the BNC connector on top of the scanner and turn clockwise until tight.
Installing the Belt Clip
Place the Belt Clip slightly above the mounti:lg area on the back of the scanner, and press downward and in.
~
14