when Auto Store is activated.) To stop Auto Store, press [HLD], [MANUAL], or [AUTO].
SEND KEY | Press [SND] to transfer a displayed |
| |
| frequency to any open (empty) bank channel. |
| When the bank Indicators start flashing, |
| press the numeric keys for the selected bank. |
| Then press [E) to complete the transfer. |
LCD Display
BANK 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 TURBO SCAN PRI DLY AUTO SRCH COUNTqBAITA
P 8 8 8 18 8 8. 8 8 8 8 MHz
HOLD UO WX 1 2 . 50KHz AM NFM WFM IKEYLOCKI
MEMORY BANK NUMBERS
(1 through 20) Each memory bank consists of 20 channels that you can select or deselect during scanning operation, using the numeric keypad. When you select a bank, its number appears on the display. When you deselect a bank, its number disapRears from the display. When you press [MANUAL] to stop scanning, only the bank of the current channel appears.
MODE | Indicate the current mode(s) of operation |
INDICATORS | (TURBO,SCAN,PRI,DLY,AUTO,SRCH,COUNT, . |
STEP INDICATOR
SIGNAL MODE INDICATOR
LOW BATTERY INDICATOR
CHANNEL
NUMBER
FREQU ENCY NUMBER
HOLD, UO, WX,KEYLOCK). Each of these modes is described in the Front Panel
features section, in the related key description. Note: Only the active mode(s) are displayed during operation.
Indicates the frequency step automatically when the scanner moves through the selected band. While searching for active frequencies, you can change the factory preset auto step to 5 kHz, 12.5 kHz,
25 kHz, 50 kHz, or press [.] twice to reset back to auto steps. Note: Manually
selected steps are erased when you turn off the power.
Displays the automatic signal selection: AM, NFM, orWFM.
Appears on the display when the Battery Pack is Iow and needs recharging.
Indicates the current channel that the scanner IS on.
Indicates the frequency being received by the scanner.
12
