![](/images/new-backgrounds/1205101/20510139x1.webp)
6.Press [E]. The frequency is now programmed into the current channel.
You are finished, and may now skip to the next section.
7.Press [SND] twice. When the channel number blinks, enter the new channel number using the numeric keys.
8.Press [HLD] to see if the selected channel is already programmed.
If the selected channel already has a stored
frequency:
The display alternates between the current channeV frequency and the selected channel! frequency. If you wish to keep the selected channel's frequency, press[.] twice to return to Step 7. Otherwise, that frequency will be replaced by the new frequency selection when programming is completed.
If the selected channel is open (empty):
The display alternates between the current channellfrequency and the selected channeVopen frequency (000.000).
Note: Be sure you have pressed [HLD] before continuing with the next step. Otherwise IlError" appears on the display when you try to complete the programming entry. This is to avoid accidentally erasing a frequency you want to keep.
9.Press [E] to complete programming.
You are finished, and may now skip to the next section.
10.Press [SND].
"BANK" flashes on the display, and the current bank number is shown.
11.Press the numeric key(s) for the new bank selection.
The new bank indicator appears, and its lowest open channel starts flashing. When programming is completed, the frequency will automatically be stored into the channel. Note: After entering the selected bank number if the screen displays a message indicating the bank is IIFULL",inthis case select another bank.
12.Press [E] to complete programming.
The frequency is stored, and the bank channel is displayed with its new frequency. (The old channel will retain its original frequency.)
18