Advanced (Playback)
109
VQT1B25
•Do not turn the camera off or perform
any other operations before copying is
finished. The data on the built-in
memory or the card may be damaged
or lost.
4Press [MENU/SET] several times to close the menu.
•If you copy picture data from the built-in
memory to a card, the screen
automatically returns to the playback
screen when all the pictures are copied.
•If you copy picture data from the built-in
memory to a card, we recommend using a
card which has more free space than the
built-in memory (about 27 MB).
•If a picture with the same name as the
picture to be copied exists in the copy
destination, the picture will not be copied.
(P124)
•It may take time to copy the picture data.
•Only pictures recorded with a Panasonic
digital camera (LUMIX) will be copied.
(Even if the pictures were recorded with a
Panasonic digital camera, you may not be
able to copy them if they were edited with
a PC.)
•DPOF settings on the original pict ure data
will not be copied. Set the DPOF settings
again after copying is finished. (P102)
Press [ ] to display the [PLAY] mode
menu and select the item to set. (P97)
Usually, it is not necessary to format the
built-in memory and the card.
Format them when the message [BUILT-IN
MEMORY ERROR] or [MEMORY CARD
ERROR] appears.
Press 3 to select [YES] and then
press [MENU/SET].
(The illustration shows the screen when
the built-in memory is formatted.)
•When a card is not inserted, you can
format the built-in memory. When a card
is inserted, you can format the card.
•If you press [MENU/SE T] while
formatting the built-in memory, the
formatting will stop halfway. (However,
all the pictures will be deleted.)
Formatting irretrievably deletes all the data
including any protected pictures. Check the
data carefully before formatting
.
•If the card has been formatted on a PC or
other equipment, format it on the camera
again.
•Use a battery wit h sufficient battery power
(P26) or the AC adaptor (DMW-AC7PP;
optional) when formatting.
•Do not turn the camera off during formatting.
•It may take longer to format the built-in
memory than the card. (Max. about 15 sec.)
•You cannot format an SD Memory Card or
an SDHC Memory Card when the card’s
Write- Protect switch A is set to [LOCK].
•If the built-in memory or the card cannot
be formatted, consult your nearest
Service Center.
[FORMAT]
Initializing the card
MENU
SET
FORMAT
DELETE ALL DATA
ON THE BUILT-IN MEMORY?
NO
SELECT SET
MENU
YES
MENU
SET
2
For USA assistance, please call: 1-800-272-7033
or send e-mail to : digitalstillcam@us.panasonic.com
For Canadian assistance, please call:
1-800-99-LUMIX (1-800-995-8649) or
send e-mail to: lumixconcierge@ca.panasonic.com
DMC-FZ8_PP ENG.book 109 ページ 2006年12月26日 火曜日 午後4時20分