Panasonic DMC-FZ8, DMCFZ8K Press MENU/SET Press 3/4 to select ISO Limit and then press, Settings

Advanced (Recording pictures)

•The exposure and the white balance vary depending on the burst mode setting.

When burst mode is set to [ ], they are fixed to the values set for the first picture.

When the burst speed is set to [ ] or

[ ], they are adjusted each time you take a picture.

•If you are following a moving subject while taking pictures in a place (landscape) indoors, outdoors etc. where there is a large difference between the light and shade, it may take time until the exposure is stable. If burst is used at this time, the exposure may not become optimal.

•When the self-timer is used, the number of recordable pictures in burst mode is fixed to 3.

•Burst mode is not canceled when the camera is switched off.

•When auto bracket and burst mode are set simultaneously, auto bracket will be performed.

•When burst mode is set, the auto review function is activated regardless of the auto review setting. (The picture is not enlarged.) You cannot set the auto review function in the [SETUP] menu.

•When burst mode is activated, [AUDIO REC.] cannot be used.

•You cannot take pictures in burst mode when the quality is set to [RAW] or [STARRY SKY] in scene mode is selected.

52

Changing the sensitivity according to the movement of the subject being recorded

The camera detects the movement of the subject near the center of the screen and then sets the optimal ISO sensitivity and shutter speed according to the movement and the brightness of the subject.

1 Press [MENU/SET].

2 Press 3/4 to select [ISO LIMIT] and then press 1.

REC			1/4
	W.BALANCE		AWB
	WB ADJUST.
MAXISO	ISO LIMIT		400
	ASPECT RATIO		800
	PICT.SIZE		1250
SELECT		SET MENU	1250

3 Press 3/4 to select the item and then press [MENU/SET].

Item Settings

400The ISO sensitivity

800automatically increases up to the set value according to the

1250 movement and brightness of the subject.

•The higher the value set for the ISO sensitivity, the more effectively the jitter will be reduced. However, picture noise will increase.

VQT1B25