Preparation

Attaching the Lens Cap/Strap

Lens Cap (supplied)

1 Pass the string through the hole on the lens cap.

2 Pass the same string through the hole on the camera.

3 Attach the lens cap.

When you turn the camera off, carry the camera or play back the pictures, attach the lens cap to protect the surface of the lens.

Detach the lens cap before turning on the camera in the recording mode.

Be careful not to lose the lens cap.

Strap (supplied)

1 Pass the strap through the hole at the strap eyelet.

2 Pass the strap through the stopper and fasten the strap.

A: Pull the strap 2 cm or more.

Attach the strap to the other side of the camera being careful not to twist it.

Check that the strap is firmly attached to the camera.

Attach the strap so that the “LUMIX” LOGO is on the outside.

11

VQT1B25

Page 11
Image 11
Panasonic DMCFZ8K, DMC-FZ8 operating instructions Attaching the Lens Cap/Strap, Lens Cap supplied, Strap supplied