Connecting to other equipment
117
VQT1B25
Playing Back Pictures on a TV Screen∫Playing back pictures using the AV
cable (supplied)
•Set the [TV ASPECT]. (P25)
•Turn this unit and the TV off.
1Connect the AV cable A
(supplied) to the [AVOUT] socket
on the camera.
•Connect the AV cable with the [ ]
mark facing the [1] mark on the
[AVOUT] socket.
•Hold the AV cable at B and insert
straight in or take straight out.
2Connect the AV cable to the video
input and the audio input sockets
on the TV.
•1 Yellow: to the video input socket
•2 White: to the audio input socket
3Turn the TV on and select external
input.
4Turn the camera on.
•Depending on the aspect setting, black
bands may be displayed on the top and
bottom or the left and right of the pictures.
•Do not use any other AV cables except the
supplied one.
•Audio playback is monaural.
•Read the operating instructions for the TV.
•When you play back a picture vertically, it
may be blurry.
•You can view pictures on TVs in other
countries (regions) which use the NTSC
or PAL system when you set
[VIDEO OUT] in the [SETUP] menu. Even
if you set [VIDEO OUT] to [ PAL], the
output signal will still be NTSC in the
recording mode.
∫Playing back pictures on a TV with an
SD Memory Card slot
Still pictures recorded on an SD Memory
Card can be played back on a TV with an
SD Memory Card slot.
•You cannot play back an SDHC Memory
Card if the TV model does not support it.
•Depending on the TV model, pictures may
not be displayed on the full screen.
•Motion pictures cannot be played back. To
play back motion pictures, connect the
camera to the TV with the AV cable
(supplied).
•You may not be able to play back
MultiMediaCards.
DC IN 8.4V
DIGITAL/
AV OUT
DMC-FZ8_PP ENG.book 117 ページ ２００６年１２月２６日 火曜日 午後４時２０分