Others

Using the MC Protector/ND Filter

The MC protector (DMW-LMC52; optional) is a transparent filter which affects neither the colors nor the amount of light, so it can always be used to protect the camera’s lens.

The ND filter (DMW-LND52; optional) reduces the amount of light to approximately 1/8th (equal to adjusting the aperture value 3 increments) without affecting the color balance.

1 Attach the hood adaptor.

2 Attach the MC protector 1 or the ND filter 2.

118

You cannot attach the MC protector and the ND filter at the same time.

If the MC protector/ND filter are tightened too much, you may not be able to remove them. Do not tighten them too much.

Do not hold the MC protector/ND filter too tightly.

When taking pictures with the flash using the MC protector or ND filter, vignetting effect may occur.

If the MC protector/ND filter are dropped, they may be destroyed. Be careful not to drop them when attaching them to the camera.

You can attach the lens hood when the MC Protector and ND Filter are attached.

You cannot attach a conversion lens or the close-up lens to the hood adaptor.

The lens adaptor (DMW-LA2; optional) is necessary to attach a conversion lens or close-up lens.

MCu“Multi-coated” NDu“Neutral Density”

VQT1B25

Page 118
Image 118
Panasonic DMC-FZ8, DMCFZ8K operating instructions 118, MCuMulti-coated NDuNeutral Density