Basic
31
VQT1B25
•[SENSITIVITY] (P79):
This setting becomes the same as when
the highest ISO sensitivity is set to
[ISO800] in intelligent ISO sensitivity
mode [ ]. (P52)
•[ASPECT RATIO]/[PICT.SIZE]/[QUALITY]
(P80):
–[ ENLARGE]:
: (7M)/
–[ 4qk6q/10k15cm]:
: (2.5M EZ)/
–[ E-MAIL]:
: (0.3M EZ)/
•[AF MODE] (P83):
[]
•[AF ASSIST LAMP] (P85):
[ON]
•[METERING MODE] (P82):
[]
•You cannot use the following functions.
–High angle mode
–White balance fine adjustme nt
–Exposure compen sation
–Flash output adjustment
–Auto bracket
–[AUDIO REC.]
–[D.ZOOM]
–[COL.EFFECT]
–[PICT.ADJ.]
–[CONT.AF]
–[PLAY ON LCD]
–Out-of-frame display
–[GUIDE LINE]
•You cannot set the following items.
–[ZO OM RESUME]
–[TRAVEL DATE]
–[WORLDTIME]
–[CONVERSION]
Focus range in simple mode
•The zoom magnification values will
change when using the extended optical
zoom.
•Refer to P54 for the tele-macro.
The Backlight Compensation
Backlight refers to when light comes from
behind a subject.
In this case, the subject, such as a person,
will become dark so this function
compensates the backlight by brightening
the whole of the picture.
Press 3.
•When the backlight compensation
function is activated, [ ]
(compensating backlight ON indication
A) appears. Press 3 again to cancel
this function.
•We recommend using the flash when you
use the backlight compensation function.
(The flash is fixed to Forced ON [ ].)
•The flash setting is fixed to AUTO/
Red-eye reduction [ ] when the
backlight compensation function is set to
[OFF].
5 cm (0.17 feet)
2 m (6.6 feet)
1 m (3.3 feet)
7
BACKLIGHT
7
BACKLIGHT
DMC-FZ8_PP ENG.book 31 ページ 2006年12月26日 火曜日 午後4時20分