ClearSounds V508 manual LCD Window Icons Descripton, Telephone Set-up, Installing Batteries

LCD WINDOW ICONS DESCRIPTON

Icon		Function
	New Call	Indicates you have missed one or more calls
	MSG Waiting	Indicates you have one more voice messages
	Off Hook	Indicates the line is engaged
	Hands-Free	Indicates the handsfree function is enabled
	Battery Icon	Indicates battery charge level
	Shake Icon	Indicates the shaker and visual ringer is
		enabled
	Signal Icon	Indicates the current signal strength. If the
		handset is too far from the base, this icon will
		blink on the LCD.
	Alarm Icon	This Icon appears when you set an alarm to
		ring at a specified time.
	Keypad Lock	This icon appears when the keypad is locked
	ICM Icon	This icon appears when you have new
		messages

Telephone Set-up

Choose a location for the base near an electrical outlet and a telephone jack.

Connect one end of the phone line cord to the base of the phone and the other end to a standard phone wall outlet.

Connect the modular end of the AC power adapter to the power jack of the base, and then plug the AC Adapter into a standard AC wall outlet.

Installing Batteries

Handset batteries MUST be connected before beginning initial charging!

Remove battery compartment cover by removing the memory dial reference card by sliding it downwards. Then using the small screwdriver (provided).

Install new batteries. Be sure to observe battery polarity as imprinted on the base of the compartment

Replace the battery compartment cover and replace the screw to secure the cover.

NOTE: Reversing the orientation of the batteries may damage the handset.

6 – ENGLISH