along the edge of one of the “arms” and release the clip. It should then lift off easily.
Turning the Handset On/Off
If the handset is in off mode when you place the handset on the base, it automatically turns on. To turn the handset on or off in standby mode, follow these steps:
To turn the handset on when it’s off, press and hold the END KEY until you switch the display on. On power up, the handset will enter subscription mode and search for a registered base. A message as shown here will be displayed to the user, and the Antenna Icon will flash.
To turn the handset off, key the END KEY key pressed until the display turns off.
NOTES: If the handset is successful in finding a base, the handset will enter the Standby mode, the display will show handset number and the handset name, antenna icon, battery icon, and current time. If the handset is not successful in finding a base, the handset will behave according to the Out of Range condition.
Nothing will appear on the LCD when battery power is very low. YOU SHOULD FULLY CHARGE THE HANDSET BEFORE USING.
Basic A300 Operation
Answering a Call
If the handset is off of the base, press the DIAL KEY to receive the call. The OFF HOOK ICON will appear on the LCD.
Or if you activated the Auto Answer Function - If the handset is in the base, lift the handset to receive the call.
When you are finished with your call either press the END KEY or replace the handset on the base.
NOTE: When you finish the call the LCD displays the call duration time.
Making a Call
Pick up the handset and press the DIAL KEY and wait for a dial tone.
8 – ENGLISH
