ClearSounds V508 manual Base Settings, Flash Time, Setting the Dial Mode, Modify PIN

Press the DOWN KEY to scroll through the menu and select PHONEBOOK then press the SOFT KEY to make your selection

Press the DOWN KEY to scroll through the menu and select DELETE then press the SOFT KEY to make your selection

Press the DOWN KEY to scroll through and select the name you want to delete is displayed, then press the SOFT KEY. The display will show “CONFIRM?”. You can press the SOFT KEY to Delete the number or press SOFT KEY to choose CANCEL.

NOTE: The memory default names are M1-M4 and SOS, you can add a name or something behind them but you cannot delete the default name.

BASE SETTINGS

Flash Time

You can change the FLASH time by using the following steps: Press the SOFT KEY under MENU while in standby mode

Using the UP or DOWN KEY scroll through the menu and select BS Settings, press the SOFT KEY to SELECT

Using the DOWN KEY scroll through the menu and select FLASH TIME, press the SOFT KEY to SELECT

The display shows the current setting. Using the DOWN KEY scroll through to select Flash-1 (600ms) or Flash-2 (300ms), using the SOFT KEY select SAVE.

Setting the Dial Mode

Press the SOFT KEY under Menu in the LCD Screen.

Press the UP or DOWN KEY to scroll through the menu and select BS Settings by pressing the SOFT KEY

Press the DOWN KEY again to scroll to DIAL MODE then press the SOFT KEY to make your selection.

Press the DOWN KEY again to select TONE or PULSE press the SOFT KEY to select SAVE

NOTE: If you are not sure which dialing mode to select contact your local phone service provider.

Modify PIN

You can change the PIN Number of the base. The default pin is 0000.

Press the SOFT KEY under MENU while in standby mode

25 – ENGLISH