Operation
Figure 10
To turn left or right, release pressure on the motion control lever toward the desired turn direction.
3.To stop, position both motion control levers in the neutral operate position.
Adjusting the Front Reference/Speed Control Bar
Adjust the front reference/speed control bar for desired maximum forward speed.
1.Stop the machine and move the motion control levers to the neutral position.
2.Disengage the PTO.
3.Unlock the handles on both sides of the control tower by pulling outward (see Figure 11).
Figure 11
1. | Front of the machine | 4. | Forward position — |
|
|
| faster |
2. | Control tower | 5. | Backward position — |
|
|
| slower |
3. | Unlock | 6. | Lock |
4.Move the bar forward to obtain the fastest speed.
Move the bar backward to obtain the slowest speed.
5.On both sides, rotate and push the handles inward to lock the handles against the control tower.
Important: Make sure the handles are locked in place so the front reference/speed control bar does not move during operation.
Operating the Platform
The machine can be used with the platform in the up or down position. It is the operator’s preference on which position to use.
22
