Troubleshooting

Problem

 

Possible Cause

 

Corrective Action

 

 

 

 

 

Engine loses power

1.

Engine load is excessive

1.

Reduce the ground speed.

 

2.

Air cleaner is dirty.

2.

Clean or replace the air cleaner element.

 

3.

Oil level in the crankcase is low.

3.

Add oil to the crankcase.

 

4.

Cooling fins and air passages for the

4.

Remove the obstructions from the cooling

 

 

engine are plugged.

 

fins and air passages.

 

5.

Vent hole in the fuel cap is plugged.

5.

Clean or replace the fuel cap.

 

6.

Dirt in fuel filter.

6.

Replace the fuel filter.

 

7.

Dirt, water, or stale fuel is in the fuel

7.

Contact an Authorized Service Dealer.

 

 

system.

 

 

 

 

 

 

 

Engine overheats

1.

Engine load is excessive

1.

Reduce the ground speed.

 

2.

Oil level in the crankcase is low.

2.

Add oil to the crankcase.

 

3.

Cooling fins and air passages for the

3.

Remove the obstructions from the cooling

 

 

engine are plugged.

 

fins and air passages.

 

 

 

 

 

Mower pulls left or right (with levers fully

1.

Tire pressure in drive tires not correct.

1.

Adjust tire pressure in the drive tires.

forward).

2.

Tracking needs adjustment.

2.

Adjust the tracking by turning the LH

 

 

 

 

 

adjustment rod in the direction that the

 

 

 

 

mower needs to be adjusted to. Rotate the

 

 

 

 

adjustment rod in 1/4 turn increments

 

 

 

 

until the mower tracks correctly.

 

 

 

 

 

Machine does not drive.

1.

Bypass valve is not closed tight.

1.

Tighten the bypass valve.

 

2.

Drive or pump belt is worn, loose or

2.

Change the belt.

 

 

broken.

 

 

 

3.

Drive or pump belt is off a pulley.

3.

Change the belt.

 

 

 

 

 

Uneven cutting height.

1.

Blade(s) not sharp.

1.

Sharpen the blade(s).

 

2.

Cutting blade(s) is/are bent.

2.

Install new cutting blade(s).

 

3.

Mower deck is not level.

3.

Level mower deck from side-to-side and

 

 

 

 

front-to-rear.

 

4.

Underside of mower is dirty.

4.

Clean the underside of the mower.

 

5.

Tire pressure in drive tires not correct.

5.

Adjust tire pressure in the drive tires.

 

6.

Blade spindle bent.

6.

Contact an Authorized Service Dealer.

 

7.

Tips of adjacent blades are at an uneven

7.

Replace blades, spindles and (or) check

 

 

cutting height. Blades tips should be even

 

for damage to mower deck.

 

 

within 3/16 inch which is approximately

 

 

 

 

one blade thickness.

 

 

 

 

 

 

 

Abnormal vibration

1.

Cutting blade(s) is/are bent or unbalanced.

1.

Install new cutting blade(s).

 

2.

Blade mounting bolt is loose.

2.

Tighten the blade mounting bolt.

 

3.

Engine mounting bolts are loose.

3.

Tighten the engine mounting bolts.

 

4.

Loose engine pulley, idler pulley, or blade

4.

Tighten the appropriate pulley.

 

 

pulley.

 

 

 

5.

Engine pulley is damaged.

5.

Contact an Authorized Service Dealer.

 

6.

Blade spindle is bent.

6.

Contact an Authorized Service Dealer.

 

7.

Belt is damaged.

7.

Install new belt.

 

 

 

 

 

Blades do not rotate.

1.

Drive belt is off pulley.

1.

Check belt for damage; replace if

 

 

 

 

necessary. Install drive belt and check

 

 

 

 

adjusting shafts and belt guides for correct

 

 

 

 

position.

 

2.

Deck belt is worn, loose or broken.

2.

Install new deck belt.

 

3.

Deck belt is off pulley.

3.

Install deck pulley and check the idler

 

 

 

 

pulley, idler arm and spring for correct

 

 

 

 

position and function.

 

4.

Broken or missing idler spring.

4.

Replace the spring.

 

5.

Damaged electric clutch.

5.

Contact an Authorized Service Dealer.

 

 

 

 

 

48

Page 48
Image 48
Exmark 4500-759 Rev A manual Troubleshooting

4500-759 Rev A specifications

The Exmark 4500-759 Rev A represents an innovative leap in turf management equipment, designed to enhance the efficiency and effectiveness of landscaping professionals. As a leading name in the lawn care industry, Exmark has equipped this model with state-of-the-art technologies and features that cater to both commercial and residential users.

One of the standout characteristics of the Exmark 4500-759 Rev A is its robust engine performance. Powered by a high-efficiency engine, it delivers consistent power and torque, allowing for seamless operation across diverse terrains. This engine is complemented by advanced cooling systems, ensuring optimal temperature management during extended use, which ultimately prolongs the equipment's lifespan.

The cutting system on the 4500-759 Rev A is another highlight, featuring Exmark’s patented cutting deck design. The advanced blade and deck configuration promotes superior grass dispersion and minimizes clumping, resulting in a polished finish that landscapers strive to achieve. The adjustable cutting height feature allows users to tailor the lawn height to their preference, making it versatile for various types of grass and seasonal conditions.

Operator comfort and ease of use are paramount in the design of the Exmark 4500-759 Rev A. The ergonomically designed seat and user-friendly controls provide a smooth driving experience. The intuitive dashboard offers easy access to critical information about the mower’s operation, ensuring that operators can focus on the task at hand without any distractions.

Additionally, this model incorporates innovative technology with its integrated GPS tracking system, which enhances efficiency by allowing users to monitor location and performance remotely. This feature not only aids in job tracking but also supports maintenance scheduling, optimizing service intervals and reducing downtime.

Furthermore, the Exmark 4500-759 Rev A is built with durability in mind. The heavy-duty frame and reinforced components withstand rigorous use, ensuring long-lasting performance in demanding environments. The model's versatility enables it to adapt for various landscaping tasks, from mowing to mulching, making it a valuable tool for professionals.

In conclusion, the Exmark 4500-759 Rev A is a powerful and versatile mower equipped with advanced technologies that simplify lawn care while maximizing results. Its combination of performance, comfort, and durability positions it as an essential choice for those in the landscaping industry, empowering users to achieve their desired outcomes with confidence.