Exmark 4501-191 Rev.A manual Specifications, Model Numbers, Systems

Models: 4501-191 Rev.A

1 64
Download 64 pages 58.45 Kb
Page 14
Image 14

Specifications

Specifications

Model Numbers

Serial Nos: 312,000,000 and Higher

QTE651KA421; QTE691KA501; QTS691KA502

Systems

Engine

Engine Specifications: See your Engine Owner’s Manual

Engine Oil Type: Exmark 4-Cycle Premium Engine Oil

RPM:

Full Speed: 3300 ±100 (max) RPM (No Load)

Idle: 1650 (min) RPM

Polarity: Negative Ground

Fuses: One 30 amp, one 25 amp; blade type

Safety Interlock System

PTO must be disengaged, motion control levers out (brake engaged) to start engine. (It is not necessary for the operator to be in the seat to start the engine.)

Operator must be in seat when PTO is engaged or motion control levers are moved in or engine will stop.

Fuel System

Capacity: 3.0 gal. (11.4 L)

Operator Controls

Fuel Recommendations:

• Steering and Motion Control:

 

For best results, use only clean, fresh, unleaded gasoline with an octane rating of 87 or higher ((R+M)/2 rating method).

Oxygenated fuel with up to 10% ethanol or 15% MTBE by volume is acceptable.

Do Not use ethanol blends of gasoline (such as E15 or E85) with more than 10% ethanol by volume. Performance problems and/or engine damage may result which may not be covered under warranty.

Do Not use gasoline containing methanol.

Do Not store fuel either in the fuel tank or fuel containers over the winter unless a fuel stabilizer is used.

Do Not add oil to gasoline.

Fuel Filter:

Kawasaki P/N 49019-7005

Electrical System

Charging System: Flywheel Alternator

Charging Capacity: 15 amps

Battery Type: 195 CCA

Battery Voltage: 12 Volt

Note: Motion control levers are adjustable to two heights.

Separate levers, on each side of the console, control speed and direction of travel of the respective drive wheels.

Steering is controlled by varying the position of the levers relative to each other.

Moving motion control levers outward (in slots) locks the drive system in neutral and applies the parking brake.

PTO Engagement Switch: Engages electric clutch (to drive belt) which engages mower blades.

Deck Height Adjustment Lever: Sets cutting height to desired position.

Deck Lift Assist Lever: Foot pedal that assists in raising the deck.

Seat

Type:

42 inch unit: Standard seat with high back, foam padded with spring suspension and armrests.

50 inch unit: Two tone upholstered seat with spring suspension and armrests.

14

Page 14
Image 14
Exmark 4501-191 Rev.A manual Specifications, Model Numbers, Systems

4501-191 Rev.A specifications

The Exmark 4501-191 Rev.A is a cutting-edge lawn mower designed to deliver exceptional performance and efficiency for both residential and commercial users. With its robust build and advanced technology, this model has quickly gained popularity among landscapers and homeowners alike.

One of the standout features of the Exmark 4501-191 Rev.A is its powerful engine. Equipped with a high-performance Kohler engine, this mower provides ample horsepower and torque, ensuring efficient cutting even in tough conditions. This allows users to tackle dense grass and uneven terrains with ease, making it ideal for various landscaping needs.

The mower's innovative cutting system is another highlight that sets it apart. Featuring a large, durable cutting deck, the Exmark 4501-191 Rev.A offers an impressive cutting width, enabling users to cover more ground in less time. The deck is designed for precision, providing a clean and even cut every time. Additionally, the adjustable cutting height feature allows for customized lawn care, accommodating different grass types and lengths.

One of the remarkable technologies integrated into the Exmark 4501-191 Rev.A is its efficient fuel system. The mower is engineered to maximize fuel efficiency, allowing users to extend their mowing sessions without the frequent need to refuel. This feature not only saves time but also reduces overall operating costs, making the mower a cost-effective choice for users with large properties.

Comfort and maneuverability are also key characteristics of the Exmark 4501-191 Rev.A. The ergonomic controls are designed for ease of use, providing a smooth and responsive experience. The mower features large rear wheels and front casters, allowing for agile navigation around obstacles and tight spaces. This is particularly beneficial for commercial users who often work in complex environments.

Maintenance is simplified with the Exmark 4501-191 Rev.A, allowing users to focus on lawn care rather than upkeep. The model is built with durable materials, ensuring longevity and reducing wear and tear. Clear access points for cleaning and maintenance further enhance user convenience, making it easy to keep the mower in top shape.

In summary, the Exmark 4501-191 Rev.A is a high-performance lawn mower that combines power, efficiency, and ease of use. With its advanced engine, innovative cutting system, and user-friendly design, it stands out as an excellent choice for anyone looking to achieve a beautifully manicured lawn. Whether for commercial or residential use, this mower is a reliable tool that promises exceptional results.