Weider XE-A101 Before Calling for Service, Specifications, Problem Item to check

Maintenance

Before Calling for Service

If you encounter a problem, use this chart before calling for service.

Problem	Item to check
• The display shows symbols that do not	• Was the machine reset in the proper way shown on
make sense.	page 4?
• The display will not illuminate even	• Is the power supplied to the electrical outlet? (Plug
when the mode switch is not set to “	”. in another electrical device.)
The machine fails to operate when any	• Is the power cord firmly connected to the electrical
key is pressed.	outlet?
• The display is illuminated, but the	• Is the mode switch properly set to the REG
machine does not accept key entries.	position?
	• Was the machine reset in the proper way shown on
	page 4?
• Journal paper does not feed properly in	• Is the take-up spool installed properly?
the printer.	• Is there a paper jam?
• Printing is faded or illegible.	• Isn’t the ink roller used up?
	• Is the ink roller installed properly?

Specifications

Model:	XE-A101
Size:	330(W) x 363(D) x 253(H) millimeters
Weight:	5.0 kg
Power Source:	Official (nominal) voltage and frequency
Power Consumption:	Stand-by: 6.4 W	Operating: 13 W
Work Temperature:	0 to 40 °C
Display:	LED (Light-Emitting Diode) numeric display
Printer:	1 station print wheel selective type
Printing Capacity:	Max. 13 digits
Paper Roll:	Width:	57.5 mm ± 0.5 mm
	Max. diameter:	80 mm
	Paper quality:	Bond paper
		(thickness: 0.06 to 0.085 mm, weight: 47 to 64 g/m2)
Cash Drawer:	3 slots for bills, 5 for coins
Accessories (supplied):Paper roll			1 roll
	Drawer lock key		2
	Instruction manual		1 copy (this manual)
	Quick start guide		1 copy
	Ink roller		1 (already installed)
	Take-up spool		1

* Specifications and appearance are subject to change without notice.

24