Other Features for Sales Entries
• Correction of earlier entries (indirect void)
With this function, you can correct department or PLU entry incorrectly made during a transaction if you find it before finalizing the transaction by pressing t, R or C.
Example To correct 3P entry to 4P after another correct entry has been made, enter the following:
3P 1150! 3vP 4P t
Indirect void | correct |
for 3P | entry |
• Correction after issuance of receipt
This function allows you to reverse the entries made on an incorrect receipt. The entries are
subtracted from each totalizer and add to a void totalizer. Slide the mode switch to 
position, and enter the same details that are on the incorrect receipt. (If necessary, enter the secret code
and press t when you slide the mode switch to 
position.)
Reading and Resetting of Sales
All the data on all of your registrations as well as other transaction information will remain in the memory of your cash register as long as your cash register has power (Be sure you have live batteries installed in case of a power failure). This information can be printed in the form of a report which can be helpful to you in running your business.
X reports for reading of sales
This report, when taken in the X/F mode, prints the accumulated information of sales.
Taking an X report is a good way to do a
To issue an X report, set the mode switch to the X/F position and press t.
Z reports for reading and resetting of sales
This report, when taken in the Z/PGM mode, prints the same information as an X report. Once this report had been printed, the cash register’s memory of daily information is cleared and all the transaction totals are reset to zero. Be sure to issue a Z report at the end of each day.
With a Z report printing, you can also reset GT (ground total). To issue a Z report, follow the procedure described below.
1.Set the mode switch to the Z/PGM position.
2.If necessary, enter the secret code and press t. To issue a Z report with resetting of GT:
3.Press C.
4.If necessary, enter the secret code and press C. To issue a Z report without resetting of GT:
3.Press t.
4.If necessary, enter the secret code and press t.
12
