Troubleshooting

Troubleshooting

Important: It is essential that all operator safety mechanisms be connected and in proper operating condition prior to mower use.

When a problem occurs, Do Not overlook the simple causes. For example: starting problems could be caused by an empty fuel tank.

The following table lists some of the common causes of trouble. Do Not attempt to service or replace major items or any items that call for special timing of adjustments procedures (such as valves, governor, etc.). Have this work done by your Engine Service Dealer.

Note: When disconnecting electrical connectors DO NOT pull on the wires to separate the connectors.

Problem		Possible Cause		Corrective Action

The engine overheats.	1.	The engine load is excessive.	1.	Reduce ground speed.
	2.	The oil level in the crankcase is low.	2.	Add oil to the crankcase.
	3.	The cooling fins and air passages under	3.	Remove the obstruction from the cooling
		the engine blower housing are plugged.		fins and air passages.
	4.	The air cleaner is dirty.	4.	Clean or replace the air cleaner element.
	5.	Dirt, water, or stale fuel is in fuel system.	5.	Contact an Authorized Service Dealer.

The starter does not crank	1.	The blade control switch is engaged.	1.	Move the blade control switch to
				Disengaged.
	2.	The motion control levers are not in the	2.	Move the motion control levers outward
		park position.		to the park position.
	3.	The operator is not seated.	3.	Sit on the seat.
	4.	The battery is dead.	4.	Charge the battery.
	5.	The electrical connections are corroded	5.	Check the electrical connections for good
		or loose.		contact.
	6.	A fuse is blown.	6.	Replace the fuse.
	7.	A relay or switch is damaged.	7.	Contact an Authorized Service Dealer.

Engine will not start, starts hard, or fails to	1.	Fuel tank is empty.	1.	Fill the fuel tank.
keep running	2.	The choke is not on.	2.	Move the choke lever to On.
	2.	The choke is not on.	2.	Move the choke lever to On.
	3.	The air cleaner is dirty.	3.	Clean or replace the air cleaner element.
	4.	The spark plug wire(s) is loose or	4.	Install the wire(s) on the spark plug.
		disconnected.
	5.	The spark plug(s) is pitted, fouled, or the	5.	Install a new, correctly gapped spark
		gap is incorrect.		plug(s).
	6.	There is dirt in fuel filter.	6.	Replace the fuel filter.
	7.	Dirt, water, or stale fuel is in the fuel	7.	Contact an Authorized Service Dealer.
		system.
	8.	There is incorrect fuel in the fuel tank.	8.	Drain the tank and replace the fuel with
				the proper type.
	9.	The oil level in the crankcase is low.	9.	Add oil to the crankcase.

Lawn Mower specifications

Exmark Lawn Mowers are renowned for their superior quality, innovative technology, and exceptional cutting performance, making them a top choice among professional landscapers and homeowners alike. With a rich history dating back to 1982, Exmark has built a reputation for delivering mowers that are not only durable but also efficient and user-friendly.

One of the standout features of Exmark mowers is their cutting system, which includes advanced mower decks designed for precision and efficiency. The premium cutting decks are engineered to provide unparalleled grass dispersal and a clean finish. The Exmark Vantage and Lazer Z series are particularly known for their Ultracut decks, which enhance the mowing experience with an optimal blade overlap that ensures a consistent cut.

Powering these machines are robust engines that vary across the different models, allowing users to choose the right power level for their specific needs. Exmark mowers often come equipped with Kawasaki or Kohler engines that maximize torque and effortlessly handle challenging terrains.

The technology integrated into Exmark mowers includes the innovative Red Technology. It features intelligent monitoring systems that provide real-time feedback on engine performance, ensuring optimal efficiency and reducing fuel consumption. This feature is invaluable for landscape professionals who prioritize both productivity and environmental responsibility.

Comfort and ease of use are also pivotal in Exmark's design philosophy. Many models are equipped with ergonomic controls and plush seats designed to reduce operator fatigue during long mowing sessions. For instance, the Lazer Z models boast adjustable suspension seats that provide comfort without compromising control or precision.

Furthermore, Exmark mowers offer exceptional maneuverability. The zero-turn capability allows users to navigate tight spaces and obstacles with remarkable ease. This feature is particularly beneficial for commercial landscapers who need to work efficiently in complex environments.

In terms of build quality, Exmark mowers are constructed with heavy-duty materials designed to withstand rigorous use. The durability of the chassis and components ensures a long lifespan, further enhancing the investment for both professional and residential users.

Overall, Exmark Lawn Mowers combine cutting-edge technology, superior build quality, and unparalleled performance to provide a mowing experience that stands above the competition. Whether for commercial landscaping or maintaining a pristine lawn at home, Exmark continues to deliver exceptional results and user satisfaction.

Exmark Lawn Mower manual Troubleshooting, Problem Possible Cause Corrective Action

Models: Lawn Mower

Problem

Possible Cause

Corrective Action

Lawn Mower specifications