Exmark M216KA, M216KASP Exmark Lawn Mower Safety, Maintenance and Storage, General Operation

Models: M216KA, M216KASP

1 32
Download 32 pages 12.77 Kb
Page 8
Image 8

±before clearing blockages or unclogging the chute;

±before checking, cleaning, or working on the lawn mower;

±after striking a foreign object. Inspect the lawn mower for damage and make repairs before starting and operating the lawn mower; and

±if the lawn mower starts to vibrate abnormally (check it immediately).

Stop the engine:

±whenever you leave the lawn mower; and

±before refuelling.

Reduce the throttle setting during engine run-out and, if the engine has a shutoff valve, turn the fuel off after mowing.

Stop the blade(s) when crossing gravel drives, walks, or roads.

Shut the engine off and wait until the blade comes to a complete stop before removing the grass catcher.

Do not operate the lawn mower while under the influence of alcohol or drugs.

If the lawn mower should start to vibrate abnormally, stop the engine and check immediately for the cause. Vibration is generally a warning of trouble.

Slopes are a major factor related to slip and fall accidents which can result in a severe injury. If you feel uneasy on a slope, do not mow it.

Watch for holes, ruts, or bumps. Tall grass can hide obstacles.

Do not mow near drop-offs, ditches, or embankments. You could lose your footing or balance.

Do not mow on wet grass. Reduced footing could cause slipping.

Maintenance and Storage

Keep all nuts, bolts (especially blade attachment bolts), and screws tight to ensure that the lawn mower is in safe working condition.

Never store the lawn mower with gasoline in the tank inside a building where fumes may reach an open flame or spark.

Allow the engine to cool before storing the lawn mower in any enclosure.

To reduce the fire hazard, keep the engine, muffler, battery compartment, and gasoline storage area free of grass, leaves, or excessive grease.

Check the grass catcher frequently for wear or deterioration.

Replace worn or damaged parts.

Use extra care when handling gasoline; gasoline vapors are explosive.

Never tamper with safety devices. Check their proper operation regularly.

Keep the lawn mower free of grass, leaves, or other debris buildup. Clean up any oil or fuel spills.

Stop and inspect the lawn mower if you strike an object. Repair the lawn mower, if necessary, before starting the engine.

Never attempt to make wheel height adjustments while the engine is running.

Grass catcher components are subject to wear, damage, and deterioration, which could expose moving parts or allow objects to be thrown. Frequently check the components and replace them with the manufacturer's recommended parts when necessary.

Lawn mower blades are sharp and can cut. Wrap the blade(s) or wear gloves, and use extra caution when servicing them.

Do not change the speed settings on the engine.

If you must drain the fuel from the fuel tank, do it outdoors.

To ensure the best performance and safety, purchase only genuine Exmark replacement parts and accessories.

Maintain or replace safety and instruction decals when necessary.

Exmark Lawn Mower Safety

The following list contains safety information specific to Exmark products or other safety information that you must know that is not included in the ANSI/OPEI standard.

This product is designed for cutting and recycling grass or, when equipped with a grass bagger, for catching cut grass. Any use for purposes other than these could prove dangerous to the user and bystanders.

Note: This engine is not equipped with a spark arrester muffler. It is a violation of California Public Resource Code Section 4442 to use or operate this engine on any forest-, brush-, or grass-covered land. Other states or federal areas may have similar laws.

General Operation

Ensure that the area is clear of other people before mowing. Stop the lawn mower if anyone enters the area.

4

Page 8
Image 8
Exmark M216KA, M216KASP manual Exmark Lawn Mower Safety, Maintenance and Storage, General Operation