8.Move the blade control bail to the right and then lift it up to about one inch (2.5 cm) below the handle; refer to position A in Figure 14.

Note: The fan-like noise indicates that the lawn mower blade is turning.

1

A

B

m-5085

Figure 14

1. 1 in. (2.5 cm)

9.Release the blade control bail; refer to position B in Figure 15. You should hear a ªbang.º The blade should stop in three seconds.

A

B

m-5085

Figure 15

10.Immediately push the lawn mower over the newspaper ball.

11.Stop the engine and wait for all moving parts to stop.

12.Walk around the lawn mower to check for the newspaper ball. If the ball did not go under the deck, repeat steps 6 through 11.

13.Pull the lawn mower away from the newspaper. If the newspaper ball unravels or is shredded, the blade has not properly stopped, resulting in an unsafe operating condition. Contact an Authorized Service Dealer.

Danger

If the blade brake clutch system is inoperative, the blade will continue to rotate when you release the blade control bail. Contact with the blade could occur, causing serious injury.

Check the BBC operation before each use.

Never use a BBC-equipped lawn mower with an inoperative safety system.

Take your lawn mower to an Authorized Service Dealer for repair if the safety system fails to operate properly.

Test Using the Grass Bag

You can use the grass bag to perform an additional test to check the blade brake clutch mechanism:

1.Install the empty grass bag on the discharge tunnel.

2.Start the engine.

3.Push the blade control bail (Fig. 13) down to its lowest position.

4.Move the blade control bail to the right and then lift it to about one inch (2.5 cm) below the handle. The bag should begin to inflate, indicating that the blade is engaged and rotating.

5.Release the blade control bail. If the bag does not immediately deflate, it indicates that the blade is still rotating. The blade brake clutch mechanism may be deteriorating, and, if ignored, could result in an unsafe operating condition. Have the lawn mower inspected and serviced by an Authorized Service Dealer.

Adjusting the Cutting Height

Each wheel is adjusted individually with a wheel height adjustment lever. Cutting heights are 1 inch (25 mm),

1-1/2 inches (38 mm), 2 inches (51 mm), 2-1/2 inches (64 mm), 3 inches (76 mm), and 3-1/2 inches (89 mm).

Danger

Adjusting the cutting height levers could bring your hands into contact with a moving blade and result in serious injury.

Stop the engine and wait for all movement to stop before adjusting the cutting height.

Do not put your fingers under the housing when adjusting the cutting height.

1.Pull the wheel height adjustment lever toward the wheel (Fig. 16) and move it to the desired setting.

1

m-225

Figure 16

1.Wheel height adjustment lever

11

Page 15
Image 15
Exmark M216KASPC manual Adjusting the Cutting Height, Test Using the Grass Bag

M216KASPC specifications

The Exmark M216KASPC is a high-performance, commercial-grade zero-turn mower designed to meet the rigorous demands of lawn maintenance professionals as well as discerning homeowners. This model is part of Exmark's innovative lineup, renowned for its durability, efficiency, and cutting-edge technology.

At the heart of the M216KASPC is its powerful Kohler EFI engine, offering robust performance with impressive fuel efficiency. The engine's electronic fuel injection system ensures optimal fuel delivery, which not only enhances performance but also reduces emissions and maintenance requirements. This engine is paired with a heavy-duty hydrostatic transmission that provides seamless power transfer and allows the mower to easily navigate various terrains.

One of the standout features of the Exmark M216KASPC is its 60-inch UltraCut Series 6 deck. With a design that promotes efficient airflow and a precise cutting height, this mower guarantees an exceptional cut quality and even grass distribution. The deck's dual-blade system is engineered to tackle dense turf with ease, ensuring that each pass leaves the lawn looking pristine.

The M216KASPC is equipped with Exmark’s proprietary seat and control system, which significantly enhances operator comfort and control. The ergonomically designed seat provides ample support during extended mowing sessions, while the intuitive control levers allow for precise maneuverability. This combination minimizes operator fatigue, enabling lawn care tasks to be completed more efficiently.

In addition to its impressive performance features, the Exmark M216KASPC boasts a range of technologies aimed at improving the mowing experience. With Smart Control technology, operators can easily adjust speed settings on the fly, allowing for tailored speed control based on specific mowing conditions. Furthermore, the mower's built-in hour meter and service reminders ensure that maintenance is kept on schedule, prolonging the life of the machine.

Durability is another hallmark of the M216KASPC, with a reinforced steel frame and high-quality components designed to withstand the rigors of commercial use. The tires are designed for superior traction and stability, ensuring that the mower can handle steep inclines and varied terrain without compromising performance.

In summary, the Exmark M216KASPC combines powerful performance, advanced technology, and operator comfort into one exceptional package. Whether for commercial landscaping businesses or dedicated homeowners, this zero-turn mower stands out as an ideal choice for achieving a beautifully maintained lawn. Its features reflect Exmark’s commitment to quality, making it a reliable workhorse in any yard care arsenal.