Maintenance

Note: Determine the left and right sides of the machine from the normal operating position.

Recommended Maintenance Schedule

Maintenance Service

Maintenance Procedure

Interval

 

 

 

 

Check the engine oil level.

 

Check the stopping time of the blade brake. The blade must stop within

Each Use

3 seconds of releasing the bail; if it does not, contact an Authorized Service

Dealer for repair.

 

 

Remove grass clippings and dirt from under the housing.

 

Clean the discharge tunnel and the discharge tunnel plug.

 

 

5 Hours

Check the blade and the engine mounting fasteners. Tighten them if they are

loose.

 

 

 

25 Hours

Clean the foam pre-cleaner of the air cleaner.

 

 

 

Change the engine oil (without the oil filter).1

 

Sharpen or replace the blade; maintain it more frequently if the edge dulls

 

quickly in rough or in sandy conditions.

50 Hours

Clean the blade brake clutch shield.

Check for leaks in the fuel system and/or a deteriorating fuel hose. Replace

 

 

parts if necessary.

 

Remove grass clippings and debris from under the belt cover.

 

Lubricate the pivot arms.

 

 

75 Hours

Adjust the self-propel drive system.

 

 

 

Inspect the spark plug and replace it if necessary.

 

Clean the cooling system; remove grass clippings, debris, or dirt from the engine

 

air cooling fins and starter. Clean the system more frequently in dirty or

100 Hours

high-chaff conditions.

Lubricate the gear case.

 

 

Adjust the blade brake cable.

 

Service the wheels.

 

 

300 Hours

Replace the paper air filter. Replace it more frequently in dusty operating

conditions.

 

 

 

Storage

Empty the fuel tank before repairs as directed or before storage.

 

 

1Change the engine oil after the first 8 operating hours.

Important

Refer to your engine operator's manual for additional maintenance procedures.

Caution

If you leave the wire on the spark plug, someone could accidently start the engine and seriously injure you or other bystanders.

Disconnect the wire from the spark plug before you do any maintenance. Set the wire aside so that it does not accidently contact the spark plug.

14

Page 18
Image 18
Exmark M216KASPC manual Recommended Maintenance Schedule

M216KASPC specifications

The Exmark M216KASPC is a high-performance, commercial-grade zero-turn mower designed to meet the rigorous demands of lawn maintenance professionals as well as discerning homeowners. This model is part of Exmark's innovative lineup, renowned for its durability, efficiency, and cutting-edge technology.

At the heart of the M216KASPC is its powerful Kohler EFI engine, offering robust performance with impressive fuel efficiency. The engine's electronic fuel injection system ensures optimal fuel delivery, which not only enhances performance but also reduces emissions and maintenance requirements. This engine is paired with a heavy-duty hydrostatic transmission that provides seamless power transfer and allows the mower to easily navigate various terrains.

One of the standout features of the Exmark M216KASPC is its 60-inch UltraCut Series 6 deck. With a design that promotes efficient airflow and a precise cutting height, this mower guarantees an exceptional cut quality and even grass distribution. The deck's dual-blade system is engineered to tackle dense turf with ease, ensuring that each pass leaves the lawn looking pristine.

The M216KASPC is equipped with Exmark’s proprietary seat and control system, which significantly enhances operator comfort and control. The ergonomically designed seat provides ample support during extended mowing sessions, while the intuitive control levers allow for precise maneuverability. This combination minimizes operator fatigue, enabling lawn care tasks to be completed more efficiently.

In addition to its impressive performance features, the Exmark M216KASPC boasts a range of technologies aimed at improving the mowing experience. With Smart Control technology, operators can easily adjust speed settings on the fly, allowing for tailored speed control based on specific mowing conditions. Furthermore, the mower's built-in hour meter and service reminders ensure that maintenance is kept on schedule, prolonging the life of the machine.

Durability is another hallmark of the M216KASPC, with a reinforced steel frame and high-quality components designed to withstand the rigors of commercial use. The tires are designed for superior traction and stability, ensuring that the mower can handle steep inclines and varied terrain without compromising performance.

In summary, the Exmark M216KASPC combines powerful performance, advanced technology, and operator comfort into one exceptional package. Whether for commercial landscaping businesses or dedicated homeowners, this zero-turn mower stands out as an ideal choice for achieving a beautifully maintained lawn. Its features reflect Exmark’s commitment to quality, making it a reliable workhorse in any yard care arsenal.