Cleaning the Discharge Tunnel and Plug

Remove the plug from the discharge tunnel and clean it after each use.

Always be sure that the discharge tunnel door closes securely when you release the handle. If the debris prevents the discharge door from closing securely, clean the inside of the discharge tunnel and the door thoroughly.

Warning

Grass clippings and other objects can be thrown from an open discharge tunnel and cause serious injury or kill the operator or bystanders.

Never start or operate the lawn mower unless one of the following is true:

The discharge tunnel plug is locked securely in the discharge tunnel.

The grass bag is locked in place.

The optional side discharge chute is locked in place.

The discharge tunnel door is locked in place.

Servicing the Air Filter

Clean the foam pre-cleaner every 25 operating hours. Replace the paper air filter once every season or every 300 operating hours; replace it more frequently in dusty conditions.

Important Do not operate the engine without the air filter assembly; extreme engine damage will occur.

1.Stop the engine and wait for all moving parts to stop.

2.Disconnect the wire from the spark plug (Fig. 9).

3.Remove the screw that secures the air cleaner cover (Fig. 21).

3

 

 

1

 

 

 

2

m-7282

 

 

 

 

 

Figure 21

 

1.

Screw

3. Paper air filter

 

2.

Cover

 

 

4. Remove the cover and clean it thoroughly (Fig. 21).

5.Remove the paper air filter and discard it as required (Fig. 22).

1

2

 

m-7281

 

Figure 22

1. Paper air filter

2. Foam pre-cleaner

 

 

Important Do not try to clean a paper filter.

6.Remove the foam pre-cleaner and wash it with a mild detergent and water, then blot it dry (Fig. 21).

7.Saturate the pre-cleaner with clean engine oil, then squeeze it (do not twist) to remove the excess oil.

8.Install the foam pre-cleaner.

9.Install the new paper air filter.

10.Install the cover and secure it with the screw.

Changing the Engine Oil

Change the oil after the first 8 operating hours and than after every 50 operating hours or every season (more frequently in dusty or dirty conditions).

1.Run the engine to warm the engine oil.

Note: Warm oil flows better and carries more contaminants.

Warning

Oil may be hot after engine has been run, and contact with hot oil can cause severe personal injury.

Avoid contacting the hot engine oil when you drain it.

2.Stop the engine and wait for all moving parts to stop.

3.Disconnect the wire from the spark plug (Fig. 9).

4.Place a suitable drain pan beside the right side of the lawn mower.

5.Remove the dipstick by rotating the cap counterclockwise and pulling it out (Fig. 6).

16

Page 20
Image 20
Exmark M216KASPC manual Cleaning the Discharge Tunnel and Plug, Servicing the Air Filter, Changing the Engine Oil

M216KASPC specifications

The Exmark M216KASPC is a high-performance, commercial-grade zero-turn mower designed to meet the rigorous demands of lawn maintenance professionals as well as discerning homeowners. This model is part of Exmark's innovative lineup, renowned for its durability, efficiency, and cutting-edge technology.

At the heart of the M216KASPC is its powerful Kohler EFI engine, offering robust performance with impressive fuel efficiency. The engine's electronic fuel injection system ensures optimal fuel delivery, which not only enhances performance but also reduces emissions and maintenance requirements. This engine is paired with a heavy-duty hydrostatic transmission that provides seamless power transfer and allows the mower to easily navigate various terrains.

One of the standout features of the Exmark M216KASPC is its 60-inch UltraCut Series 6 deck. With a design that promotes efficient airflow and a precise cutting height, this mower guarantees an exceptional cut quality and even grass distribution. The deck's dual-blade system is engineered to tackle dense turf with ease, ensuring that each pass leaves the lawn looking pristine.

The M216KASPC is equipped with Exmark’s proprietary seat and control system, which significantly enhances operator comfort and control. The ergonomically designed seat provides ample support during extended mowing sessions, while the intuitive control levers allow for precise maneuverability. This combination minimizes operator fatigue, enabling lawn care tasks to be completed more efficiently.

In addition to its impressive performance features, the Exmark M216KASPC boasts a range of technologies aimed at improving the mowing experience. With Smart Control technology, operators can easily adjust speed settings on the fly, allowing for tailored speed control based on specific mowing conditions. Furthermore, the mower's built-in hour meter and service reminders ensure that maintenance is kept on schedule, prolonging the life of the machine.

Durability is another hallmark of the M216KASPC, with a reinforced steel frame and high-quality components designed to withstand the rigors of commercial use. The tires are designed for superior traction and stability, ensuring that the mower can handle steep inclines and varied terrain without compromising performance.

In summary, the Exmark M216KASPC combines powerful performance, advanced technology, and operator comfort into one exceptional package. Whether for commercial landscaping businesses or dedicated homeowners, this zero-turn mower stands out as an ideal choice for achieving a beautifully maintained lawn. Its features reflect Exmark’s commitment to quality, making it a reliable workhorse in any yard care arsenal.