Exmark MHP3615KC, MHP3614KA, MHP3615KA, MHP4816BV, MHP4815KC manual Specifications

PART NO. 413206	PART NO. 413327
LOCATION: Top of Cutter Deck, Under	LOCATION: Top of Cutter Deck, Under
Center Belt Shield (36”)	Belt Shield (48” & 52” Decks)

2. SPECIFICATIONS

2.1 MODEL NUMBER:

Serial Nos. 150,000 – 189,999: MHP4816BV; MHP5216BV

Serial Nos. 150,000 – 219,999: MHP3614KA; MHP4814KA

Serial Nos. 150,000 & Higher: MHP3615KC; MHP4815KC

Serial Nos. 160,000 & Higher: MHP4817KA; MHP5217KA

Serial Nos. 190,000 & Higher: MHP4815KA

Serial Nos. 220,000 & Higher: MHP3615KA

2.2ENGINE

2.2.1Engine Specifications: See your Engine Owner's Manual.

2.2.23600 RPM (No Load).

2.3FUEL SYSTEM

2.3.1Capacity: 5.0 gal.(18.9 L.)

2.3.2Type of Fuel: Regular unleaded gasoline, 87 octane or higher. In countries using the research method, it should be a 90 octane minimum.

2.3.3Fuel Filter: Replaceable in-line

2.3.4Fuel Shut-Off Valve: 1/4 turn

2.4SAFETY INTERLOCK SYSTEM

Operator must have transmission in neutral and blade clutch disengaged to start engine. Release of OPC levers will cause the engine to stop if transmission is not in neutral and/or blade clutch is engaged.

2.5 STEERING/BRAKE CONTROL:

Fingertip drive control levers provide independent speed control, braking and neutral to each drive wheel for moving, stopping and power turning. Parking brakes are engaged by locking drive control levers in the “brake” position.

2.6TRANSMISSION:

2.6.1Peerless 700-061, five speeds forward and one reverse.

2.6.2Speed Range:

1st 2.0 mph (3.22 km/h) 4th 4.1 mph (6.60 km/h) 2nd 2.7 mph (4.35 km/h) 5th 6.2 mph (9.98 km/h) 3rd 3.5 mph (5.63 km/h) Rev. 3.1 mph (4.99 km/h)

- 8 -