e)Lower Sheave retaining bolt on clutch arm.

Adhesives such as “Loctite RC/609 or RC/680”or“Fel-Pro Pro-Lock Retaining I or Retaining II” are used on the following:

a) OPC lever hubs and cross-shaft

NOTE: Care must be used not to bond the bearing, next to each OPC hub, to the cross shaft which could cause binding of the OPC levers and erratic operation.

5.1.19An anti-seize compound is used on the following locations:

a)Between engine crankshaft and transmission and blade drive sheaves.

b)On clutch arm assembly between bearings and shaft and between lower sheave and shaft.

c)Between transmission shaft and sheaves.

d)Between the cutter housing spindles and sheaves.

5.1.20Dielectric grease is used on all blade type electrical connections to prevent corrosion and loss of contact.

5.2ADJUSTMENTS

5.2.1Cutting height and anti-scalp roller adjustment.

WARNING

POTENTIAL HAZARD

♦When the two front support rod hairpins are removed from the mower deck, the weight of the tractor section may cause the front frame to rise suddenly

WHAT CAN HAPPEN

♦If the unit rises suddenly, injury may occur.

HOW TO AVOID THE HAZARD

♦Securely hold down the front of the unit when the front support rod hairpins are removed.

a)Install hairpin clips in the holes shown on sketch below for the desired cutting height (See Figure 14).

FIG 14

ANTI-SCALP ROLLER BOLT INSTALLATION

ANTI-SCALP ROLLER AND CUTTING HEIGHT ADJUSTMENT

b)Adjust anti-scalp rollers for Normal Operating Conditions. Stop engine. Place rollers in one of the positions shown in Fig 14. Rollers will maintain 3/4 in. (19 mm) clearance to the ground to minimize gouging and roller wear or damage. For Maximum Deck Flotation, place rollers one hole position lower. Rollers should maintain 1/4 in. (6.4 mm) minimum

- 27 -

Page 31 Page 33
Page 32
Image 32
Exmark MHP3615KA, MHP3614KA, MHP3615KC, MHP4816BV, MHP4815KC manual Adjustments
Page 31 Page 33

MHP4815KC, MHP4816BV, MHP3615KA, MHP3615KC, Mhp4816bv, Mhp5216bv, Mhp3614ka, Mhp4814ka, Mhp3615kc, Mhp4815kc, Mhp4817ka, Mhp5217ka, Mhp4815ka, Mhp3615ka specifications

Exmark has long been a leader in the landscaping and turf care industry, and its MHP series of mowers epitomizes dedication to performance, efficiency, and durability. This lineup of models, including MHP4815KC, MHP3615KC, MHP3614KA, MHP4816BV, MHP5216BV, and others, has garnered attention for its innovative features and robust design.

The MHP4815KC and MHP3615KC are equipped with powerful engines, ensuring that they can handle a variety of terrain and grass types with ease. With reliable cutting decks, these machines deliver a clean, precise cut that leaves lawns looking immaculate. Their advanced blade systems are designed for optimal airflow, which enhances cutting efficiency and finish.

The MHP3614KA and MHP4816BV models showcase versatility, allowing users to customize their mowing experience. These mowers come with various deck sizes and cutting heights, providing the flexibility needed for different mowing conditions. The MHP5216BV stands out with its rugged construction, tailored for heavy-duty use, making it an ideal choice for professional landscapers and homeowners with large yards.

Integrated with modern technologies, these mowers are designed for user comfort and ease of operation. The ergonomic design of the handles, combined with padded grips, reduces user fatigue during long mowing sessions. Additionally, many models feature intuitive control systems that allow for easy maneuverability, further enhancing the mowing experience.

Safety is paramount in the MHP series. Many of these models include features such as automatic blade shut-off when the operator leaves the seat, ensuring that accidents are minimised. The robust frame construction also contributes significantly to the durability and longevity of the mowers, standing up well to the rigors of regular use.

In summary, the Exmark MHP series, including models like MHP4815KC, MHP3615KC, MHP3614KA, MHP4816BV, and others, provides top-tier performance, versatility, and safety features. With their powerful engines, advanced cutting technologies, ergonomic designs, and a commitment to user safety, these mowers are truly an investment worth considering for both avid gardeners and professional landscapers alike.
Top Page Image Contents