Manuals / Exmark / Lawn and Garden / Lawn Mower

Exmark Ultra Vac manual Assemble the Tubes, Install the Weight Plates

Models: Ultra Vac

1 40
Download 40 pages 24.63 Kb
Page 18
Image 18

20.72” units below serial number 260,000 will require the deck to be modified by adding the accessory mounting tube. Exmark kit 103-0583 contains the parts and templates required. Follow the instructions in this kit. These decks will also require drilling the hole at the front upper corner of the discharge opening to ½ inch diameter. (See Figure 6). Touch up with red paint Exmark P/N 850337.

FIGURE 6

All units

21.Mount the blower on the deck by sliding the mounting pin into the tube at the rear right corner of the deck. Swing the blower closed. Adjust the position of the front pin to engage the slot in the front of the deck. Use the latch to lock the blower in this position. Adjust the tension on the latch to draw the blower up to the deck, yet allow for release by hand.

22.Pull the spring loaded idler back and slip the belt over the top sheave on the deck spindle.

23.Install the plastic belt cover (Item 10). On 60” units the outside end of the cover is slotted and can slip between the two washers assembled in step 17. The plastic knob does not need to be removed. On 72” and 52” units the cover has a hole, and the plastic knob must be installed after the cover has been positioned. The original belt cover stud must be removed on 52” units.

4.4ASSEMBLE THE TUBES

1.Remove the six screws, nuts, and washers (Items 4,5,and 6) from the lower tube (Item 3) and slide the lower and upper tube (Item 2) together. The arrow on the upper tube should align with the dimple on the lower tube. On 60 and 72 inch units there are two sets of holes on the lower tube. The first set reached is for use with Lazer XP units. The second set reached is for Lazer Z units. Align the arrow on the upper tube with the dimple on the lower tube and slide them together until the proper set of holes is reached.

2.Fasten the upper and lower tubes together using three of the hardware sets removed from the lower tube in step 14. The heads of the screws must be inside the tube to prevent accumulation of grass inside the tube. The washer and the nut should be installed on the outside of the tube. On Lazer XP units, use the remaining three hardware sets to plug the exposed holes in the lower tube. On Lazer Z units, discard the remaining hardware sets.

3.Slip the upper end of the tube assembly into the hood opening. Slide the lower end of the tube assembly over the blower outlet and align the notch with the tube latch. Latch the tube to the blower.

4.5INSTALL THE WEIGHT PLATES

1.The four weight plates (Item 35) must be installed under the front panel of the floor pan. These weights give proper balance to the machine when the removable portions of the bagger are removed.

18

Page 17 Page 19
Page 18
Image 18
Exmark Ultra Vac manual Assemble the Tubes, Install the Weight Plates
Page 17 Page 19

Ultra Vac specifications

The Exmark Ultra Vac is a powerful and efficient vacuum system designed to streamline lawn maintenance for both professionals and homeowners. This high-performance attachment is compatible with Exmark mowers, transforming them into versatile leaf collection and debris management tools that enhance productivity and maintain a clean landscape.

One of the main features of the Exmark Ultra Vac is its robust vacuuming capability. With a large capacity collection system, this vacuum can handle a significant volume of leaves, grass clippings, and other debris, reducing the frequency of emptying during operation. The unit is equipped with a heavy-duty impeller, which provides exceptional suction power, ensuring that even wet leaves and dense clippings are effectively collected without clogging.

The Ultra Vac system is designed for easy installation and removal, making it convenient for users to switch between mowing and vacuuming modes. It integrates seamlessly with various Exmark mowers, ensuring a perfect fit that does not compromise the mower's performance. This versatility is particularly valuable for lawn care professionals who require adaptability for different tasks and conditions.

Another notable technology in the Ultra Vac is its advanced airflow design. This feature optimizes the suction flow, allowing for efficient vacuuming while maintaining the overall performance of the mower. The aerodynamic design helps to reduce noise levels, providing a quieter operation which is particularly beneficial in residential areas or noise-sensitive environments.

The Ultra Vac also boasts user-friendly features such as an adjustable chute, allowing operators to customize the height and angle of the vacuuming path. This flexibility ensures that users can effectively collect debris in various terrains and conditions. Additionally, the unit's durable construction means it can withstand the rigors of regular use, offering reliability and longevity.

Maintenance is made easy with the Ultra Vac, thanks to accessible access points and a user-friendly design. Routine checks and cleaning can be performed without requiring extensive disassembly, making it practical for busy schedules.

In summary, the Exmark Ultra Vac is a powerful, efficient, and user-friendly vacuuming system that enhances the capabilities of Exmark mowers. Its robust features, advanced technologies, and durable design make it an essential tool for anyone looking to maintain a pristine landscape with minimal effort. Whether for professional use or residential upkeep, the Ultra Vac stands out as a reliable solution for effective debris management.