Extron electronic 68-1021-01 Table of Contents, Quick Start Guide - IPL M PDP-ES, cont’d, Step

Quick Start Guide — IPL M PDP-ES, cont’d

Step 6

Attach the serial communication cable to the RS-232 port of the IPL M PDP-ES interface card within the Pioneer plasma. Attach the other end to a controller or host PC, as shown under step 5.

Step 7

Configure the IPL M PDP-ES interface card using the ARP command. Refer to IPL M PDP-ES interface card configuration in chapter 3 for more information.

Step 8

Communicate with the IPL M PDP-ES interface via the default Web pages. Refer to Communication with the interface card in chapter 4 for more information.

RS-232

RESET

IPL M PDP-ES	ACT LINK
	LAN

The IPL M PDP-ES interface card

Table of Contents

Chapter 1 • Introduction	1-1
About this Manual	1-2
About the IPL M PDP-ES Interface Card	1-2
Features	1-2
Chapter 2 • Installation and Operation	2-1
Installation Overview	2-2
Installation of IPL M PDP-ES Interface Card	2-2
Removing the Pioneer communication ES card	2-2
Installing the Extron IPL M PDP-ES card	2-3
Panel Features and Cabling	2-5
Ethernet/LAN communication	2-5
Power	2-5
RS-232 communication	2-6
Operation	2-6
Resetting the unit	2-7
Chapter 3 • Connection and Configuration	3-1
Connecting the Hardware	3-2
Direct PC connection	3-2
Ethernet/LAN port	3-2
RS-232 port	3-3
PC connection	3-3
Serial connection	3-3
Configuring the Hardware	3-3
PC configuration	3-3
IPL M PDP-ES interface card configuration	3-4
Configuring the IPL M PDP-ES using the ARP command ....	3-4
Configuring the IPL M PDP-ES using direct PC connection .3-6
Configuring the IPL M PDP-ES using the RS-232 port	3-7
Firmware upgrades	3-8
Chapter 4 • Communication and Control	4-1
Communication with the Interface Card	4-2
Accessing and using the Web server	4-2
Navigating the default Web pages	4-2
Status tab	4-2
Configuration tab	4-3
File Management tab	4-10
Pioneer tab	4-12

QS-2 IPL M PDP-ES • Quick Start Guide IPL M PDP-ES • Table of Contents i