Maintenance and Modifications, cont’d
4From the underside of the Cable Cubby, gently push the additional power module into the desired position at the desired elevation. Secure the power module into position with the included four Phillips head screws (figure
Extron
Cable Cubby 600
2 Screws ea. side
Figure 3-7 — Installing the power module
5If desired, assemble and install replacement AAP shelf assemblies. Remember that the cable pull function of the Cable Cubby requires at least two AAPs. See Installing the Cables and AAPs in chapter 2, Installation.
6If you removed the cubby from the table, reinstall the surface mount enclosure. See Removing and Replacing the Cable Cubby, steps 8 through 11, earlier in this chapter.
Cable Cubby® Products
AAppendix A
Reference Information
Specifications
Cable Cubby Part Numbers
Included Parts
Replacement/Modification Part Numbers
Routing Template Part Numbers
Top Plate Dimensions