Extron electronic CIA111 Mounting the CIA114F5, Installation, cont’d, 9 - CIA114F5 installed

Installation, cont’d

Mounting the interface to the wall box

1.	Remove power from the interface by disconnecting the
	power supply.
2.	Place the interface through the opening in the wall or
	furniture and into the wall box. Take care not to damage
	the cables, which fit behind the interface, at the back of the
	wall box.
3.	Mount the interface’s faceplate to the wall box with the
	provided machine screws (figure 2-8).

2-gang Wall Box

Extron

CIA111

	ONITO	R
NO M

	E SH	IFT
IMAG
			OUTP	UT
		TOR
	MONI
			INPU	T
		UTER
COMP

		INPU	T
AU	DIO		to
			Au er
			Pow

Figure 2-8 — Mounting the interface to the wall box

4. Reconnect the power supply and restore power to the equipment.

Mounting the CIA114F5

The CIA114F5 is designed to fit into a Steel City 665 floor box (figure 2-9). The installation must conform to national and local electrical codes and to the interface’s size requirements.

CThe interface must be installed into an Underwriters Laboratories (UL) approved Steel City electrical floor box. The floor box is not included with the interface; the installer is responsible for obtaining and installing the box.

Figure 2-9 — CIA114F5 installed

2-12 CIA111 and CIA114 • Installation and Operation CIA111 and CIA114 • Installation and Operation 2-13