RGB Spectrum DGy 201x manual Table A-7Control Specifications, Parameter Specification

TE C H N I C A L SP E C I F I C A T I O N

.S

	.
	General Specifications
	. . .
CONTROL	The table below lists DGy 201x control specifications:
SPECIFICATIONS
. . . . . . . . .

Table A-7Control Specifications

Parameter	Specification
Control Protocol	DGy 201x control is accomplished by use of the DGy 201x ASCII
	based command set. This command set may be used with the serial
	and Ethernet control ports listed below. (see the Commands
	section in Chapter 6 for details).
Ethernet	100/1000 Base-T Ethernet port.
	• Supports control of the full set of DGy 201x commands
	over a network connection using a Telnet server/client
	architecture.
	• Internal DGy 201x web server provides the Web Control
	Panel (WCP) a graphical user interface used with a
	standard web browser.
	• The DGy 201x Ethernet port connector is a standard
	RJ45 modular connector (see the Ethernet Connector on
	page 128).
RS-232 Port	DGy 201x commands can be sent through the RS-232 port to
	control the system.
	• The RS-232 port transfers commands using the
	asynchronous serial protocol at 115200 (default), 57600,
	38400, 19200 or 9600 baud.
	• The port is configured as DCE and can handle full duplex
	transfer.
	• Support for hardware and software handshaking is
	provided.
	• The DGy 201x RS-232 port connector type is a 9-pin, sub
	miniature D connector (see the RS-232 Connector section
	on page 120 for details).

350-9047 v3.0.1 DGy Model 201x User’s Guide 124