RGB Spectrum DGy 201x manual 5Output Commands

C O M M A N D L I N E I N T E R F A C

.E

		.
		Commands
		. . .
OUTPUT	The table below lists all DGy 201x output commands, their arguments
. . . . . . . . .	and detailed descriptions.
COMMANDS
Table 6-5Output Commands
Command	Arguments	Description
GAMma	<0.5...2.0>	Sets the playback gamma.
		Default: 1.0
OUTPUT	(none)	A query command which returns information on the
		current output timing.
OutPutTiMingLOAD	<1..160>	Sets the output raster to the timing selected from
		the Timing List. In order to load the output timing
		parameters the DGy 201x must be in the FreeRun
		mode.
		(see OutputMode)
		Refer to Factory Timing List, page 118 for details.
OutPutTiMingNAME	<name>	Assigns a name to the current output timing. The
		argument can be up to 23 alphanumeric characters
		with no spaces (underscore is acceptable).
OutPutTiMingSAVE	<100..160>	Saves the timing data of the current output raster
		into the Timing List. The argument specifies which
		Timing List position is used.
		If OutPutTiMingSAVE is issued for an already
		occupied position, the DGy requests overwrite
		confirmation.
		Refer to the Factory Timing List section for
		additional details.
OutPutTiMing	<hfp> <hs> <hbp>	Sets the timing for the current output.
	<hact> <vfp> <vs>
	<vbp> <vact> <hfreq>
	<sync> <hpol> <vpol>
	<il>
OutPutTiMing	<HFP HS HBP	Changes (or reports) one parameter of the current
(Alternate)	HACT VFP VS VBP	output timing.
	VACT HFREQ SYNC
	HPOL VPOL
	IL>[<value>]

350-9047 v3.0.1 DGy Model 201x User’s Guide 98