RGB Spectrum DGy 201x manual 9Time Commands, IRIGMaster, IRIGSTandarD, Ntsip

C O M M A N D L I N E I N T E R F A C

.E

				.
				Commands
				. . .
. . . . . . . . .		The DGy 201x recorder uses an internal real time clock to time stamp
	TIME COMMANDS
		recordings. This clock can be set manually or can be synchronized
		automatically on a periodic basis to an external time reference. DGy
		201x supports the use of a Network Time Server (using the NTP
		protocol) or as an option may be connected to an IRIG-B time standard.
	Table 6-9Time Commands
	Command		Arguments	Description
	CurrentTIME		[RAW]	Displays currently computed local time of DGy
				internal clock with the date in mm/dd/yyyy
				format and time displayed in hh:mm:ss format.
				The time displayed is the current local time. If
				the time zone is changed the local time will
				also be changed.
				To display the time as an unformatted data
				string use the optional RAW argument. For
				example if the current date and time are 3/02/
				2005 8:01:23, then using the RAW argument
				DGy will respond with the string
				2005302080123.
	RealTimeClockSET		<yyyymmddhhmmss>	Sets the internal DGy real time clock. This
				should only be used if no other method of
				timesetting is available.
	TimeZone		<-12 ... +12>	Sets the timezone relative to UTC, For
				example Pacific Standard Time (PSRT) is -8 (8
				hours behind UTC). DGy must be rebooted
				before the new time zone takes effect.
	IRIGMaster		<ON OFF>	Configures the IRIG output circuitry. When ON,
				an IRIG-B timecodes in the DCLS format will
				be generated on the output based on the
				current time on the DGy. When OFF, the output
				will be a loop of the input.
	IRIGSTandarD		[DCLS MOD1K]	The IRIGSTD command is used to set the
				optional IRIG-B (format B123) input to accept
				either a DCLS (DC Level shift) or MOD1K
				(modulated 1kHz) reference signal.
				Default: DCLS
	NTSIP		[Network Time Server IP	Sets the IP address of a Network Time Server.
			address]	Up to three IP addresses can be set.
				See also the commands:
				RealTimeClockSYNC and
				RealTimeClockSYNCPERiod

350-9047 v3.0.1 DGy Model 201x User’s Guide 113