O P E R A T I O N. . Simultaneous Record/Play Option ..
.
1)Record Disk Status
This region indicates the selected disk drive and the amount of disk space remaining in H:M:S (hour:minutes:seconds).
2)Record Disk
Indicates the currently selected mounted disk, internal or remote.
3)Record Disk Capacity Indicator Bar
This bar visually indicates the available record time on the selected disk drive. The blue area represents the used portion of the disk as a percentage of the whole.
4)Record Pause
Click Record Pause to pause a recording. The symbol appears in the status area. To resume recording click on the Record or Pause button.
5)Record
Note | Recording must precede playback when operating in |
| simultaneous record/playback mode. Press Stop in |
| the player control panel. |
|
|
The recording will use the parameters established on the Record Tab in the Options Window on page 39.
The recording will be stored using the Record Clip Name and Record Clip Path. See below for details.
The symbol appears in the status area. When recording begins, the DGy 201x records the visuals from the graphics input port.
If autonaming is enabled, recording begins immediately. If the clip name has already been used, you will be asked to confirm to overwrite the clip.
6)Record Clip Name
This area indicates the name of the clip currently recording. Click the Record Clip Name label to display the Clip Browser to select clips for playback or recording. Refer to the Clip Browser Window on page 35 for details.
7)Record Clip Path
This area indicates the path of the current clip. Click the Record Clip Path label to display the Clip Browser. Use the browser to select clips for recording and set the desired path. Refer to the Clip Browser Window on page 35 for details.
8)Record Stop
Click the Stop button to halt the recording.
| DGy Model 201x User’s Guide | 70 |
