Chapter 2: The Control Panel

Select the Display Language

Printer messages can be displayed in the control panel window in a number of languages. English is the default language. To change the display lan- guage:

1.Press ON-LINE to change the printer status to off-line.

2.Press MENU 1/Menu 2 and hold for 2 seconds. PRINT MODE displays.

3.Press MENU 1/Menu 2 until LANGUAGE displays.

4.Press ENTER/Power Save. ENGLISH displays.

5.Press ♣/Reset until the desired language displays.

6.Press ENTER/Power Save to select the new language as the default setting.

7.Press ON-LINE to engage the change and place the printer back on-line.

Control Panel Lights

The lights indicate the printer status:

READY Light

READY Light (Amber)

On: Printer is on-line, ready to receive data

Off: Printer is off-line, unable to receive data; initializing; warming up; error

Blinking: Printer is printing a menu, fonts, or demo page

ATTENTION Light (Red)

On: Warning—toner is low, change drum, near end of fuser life

Off: Normal state

Blinking: Operator assistance required—paper jam, paper out, paper request, service required

Paper Size Indicator

Paper Size Indicator

[set for LETTER, the default]

The flashing marker in the printer display window indicates the paper size installed in the paper tray. This feature eliminates having to open the paper tray to see which paper size is loaded.

ATTENTION Light

English–13

Page 21
Image 21
ALFA 20DX manual Select the Display Language, Control Panel Lights, Paper Size Indicator, English-13