Chapter 4: The Front Feeder
Use the Front Feeder to print on special media without having to change the paper you have loaded in the tray(s). You can print up to 100 pieces of media or you can use the Front Feeder as a manual feed unit to print individual pieces of media
For media other than standard paper, you
must use the rear paper exit. This eliminates curling, and for labels, it eliminates peeling.
You can use the Front Feeder to print on the following media:
•Standard weight paper that is different from the paper loaded in the paper tray: e.g., letterhead, different size
–Up to 100 sheets
–16 to
–Letter, 13" & 14" Legal, Executive, A4, A5, B5, C5
(minimum 3.4" x 2.8"; maximum 8.5" x 14")
–Use either top or rear paper exit path
•Envelopes
–Up to 10 envelopes
–16 to
–Com 10, Com 9, Monarch, DL, C4, C5
–Use envelopes that have seams that run down the sides and
–Use envelopes with a smooth, even surface that are designed for laser printers: no metal clasps, snaps, windows, or
–Use rear paper exit only
•Labels
Important! Carrier sheet and label adhesive must withstand the fusing process heat of 392° F (200°C) for 1 second. Label adhesive must not be exposed; if it is, it will cause jamming in the printer.
–Up to 100 sheets
–Letter or A4
–Use label sheets designed for laser printers
–Labels must cover the entire carrier sheet.
–Use rear paper exit only
•Transparencies (up to 100 sheets)
Important! Transparencies must withstand the fusing process heat of 392° F (200°C) for 1 second without wrinkling or gumming up.
–Letter or A4
–Use transparencies designed for laser printers
–Use rear paper exit only
•Heavy weight paper such as index or card stock
–Up to 100 sheets
–Up to
–Letter, 13" & 14" Legal, Executive, A4, A5, B5, C5 (minimum 3.4” x 2.8”; maximum 14”)
–Use rear paper exit only
